AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Stillpoints

Stillpoints Lower Your Noise Floor

Reply
 
Thread Tools Display Modes
  #141  
Old 10-26-2017, 04:29 PM
vintage_tube's Avatar
vintage_tube vintage_tube is offline
BeurselfEvery1elseistaken



 
Join Date: Apr 2009
Location: East Coast
Posts: 8,518
Default

Looks like I'll have to postpone trimming the grass tomorrow (and no, I don't live in Colorado).



Best Sirs,

Bob

P.S. Damn, I hate finagling those amps out from the lower shelves and then lifting 'em & reversing the steps. Time for a cocktail to think it over -- the steps that is.
__________________
Amps: Dan D'Agostino Progression Monos on 20A dedicated breakers.
Preamp: Dan D'Agostino Progression Preamp.
Digital Source: dCS Paganini 4 stack (Transport/DAC/Clock/Upsampler).
Analogue Preamp: VAC Renaissance SE Phono stage with XLR Output Option & with Nordost Tyr 2 P/C and Tyr 2 XLR's.
Analogue Sources: SME 20/2 w/SME V arm & Nordost Valhalla TA cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote.
Vibration Control: TT on HRS M3X 1921 shelf, Stillpoint Ultra SS under dCS Transport, Stillpoint Ultra-Mini's under dCS 3 Stack. HRS NA100's under Ansuz D8 Power Distribution Bar.
Speakers: Wilson Audio Alexia in Argento Silver/Black grills.
Power Cables: 3 each 2.5M Nordost Odin Supreme Reference on amps & preamp. Nordost Valhalla V1 on dCS Transport.
Power Distribution Bar: Ansuz Mainz Diamond 8(D8) fed by Ansuz Diamond Power Cable.
Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2).
Speaker Cables: 3M Nordost Odin Supreme Reference with 4 Nordost Sort Lifts.
Signal Cables: Nordost Tyr 2 XLR's 2M on dCS Paganini and Mono amps. Nordost Valhalla 2's 110 ohm Digital AES/EBU on dCS internal connections and Crystal Cable Firewire 1394 cables on dCS.
Clock Cables: 3 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital
Headphones: Selling - 6M Cardas Clear HP cables. Vintage Koss Pro IV AA.
RCM: Audio Desk PRO
Tube Test Gear: Mint late '60's/calibrated Heathkit TT-1A & current SOTA MaxiMatcher Power and Preamp tube test sets.

Last edited by vintage_tube; 10-26-2017 at 04:58 PM.
Reply With Quote
  #142  
Old 10-26-2017, 04:43 PM
MisterBritt's Avatar
MisterBritt MisterBritt is offline
Senior Member
 
Join Date: Feb 2010
Location: Santa Fe, NM
Posts: 683
Default

Quote:
Originally Posted by vintage_tube View Post
Looks like I'll have to postpone mowing the grass tomorrow.



Best Sirs,

Bob

P.S. Damn, I hate finagling those amps out from the lower shelves and then lifting 'em & reversing the steps. Time for a cocktail to think it over -- the steps that is.
Boy, oh boy, Bob. That's a mother lode. Are those going to replace what I read are the Minis in your system? Or are they for another project altogether? You've installed these before. But in my experience, I actually put some nimble deerskin work gloves on when I installed those adaptors. Before I thought of gloves, I was cutting my fingers on those sharp edges. Just a thought because you've got your work cut out for you. Excellent!
__________________
McIntosh MP-1100 Phono Preamplifier; 60th Anniversary C-22 and MC-75s.

Last edited by MisterBritt; 10-26-2017 at 04:55 PM.
Reply With Quote
  #143  
Old 10-26-2017, 05:28 PM
vintage_tube's Avatar
vintage_tube vintage_tube is offline
BeurselfEvery1elseistaken



 
Join Date: Apr 2009
Location: East Coast
Posts: 8,518
Default

Quote:
Originally Posted by MisterBritt View Post
Boy, oh boy, Bob. That's a mother lode. Are those going to replace what I read are the Minis in your system? Or are they for another project altogether? You've installed these before. But in my experience, I actually put some nimble deerskin work gloves on when I installed those adaptors. Before I thought of gloves, I was cutting my fingers on those sharp edges. Just a thought because you've got your work cut out for you. Excellent!
Thanks for the safety info - I'm going all in for what I believe are my system weaknesses: power distribution, power & signal cabling, & finally electronic isolation.

I've addressed the following:

Power Distribution -- Ansuz Mainz D8 Power Distribution unit w/ceramic power cable & one Sparkz Harmonizer

Power Cabling - Nordost Odins on MC2301's & C1100. Still need to address Transport power cable (all dCS presently running stock cords & feel the only electromechanical device requiring immediate P/C addressing is the Transport).

Speaker Cabling: Nordost Odin 3M spade/spade

Clock Cabling: 3 Nordost Valhalla 75 ohm 1M

AES/EBU dCS Stack: Transport to DAC, Nordost 1.25M Valhalla 2

XLR Cabling from dCS DAC to C1100 and C1100 to MC2301's: Empowering Nordost trickle down ideology, so going with Nordost 2M Tyr 2's (these should be somewhat equivalent to Nordost Valhalla 1's).

Equipment Isolation: All in on Stillpoints. Ultra SS's w/adapters under MC2301's & dCS Transport. Ultra Mini's under C1100 and the 3 stack dCS (clock, DAC, Upsampler). Will utilize 3 HRS NA-150's between the stacked C1100T and 1100C.

Then I'm done until higher authority calls. It's been a fun ride since my teenage years and even more so since the advent of the Internet & forums such as AA. I've made a many purchases & a few mistakes, learned from them, but sort of tired chasing the merry go round -- and so, I'm concentrating on optimum finalization. I can see the light at the end of the tunnel so to speak. That's cool.

Best Sirs,

Bob
__________________
Amps: Dan D'Agostino Progression Monos on 20A dedicated breakers.
Preamp: Dan D'Agostino Progression Preamp.
Digital Source: dCS Paganini 4 stack (Transport/DAC/Clock/Upsampler).
Analogue Preamp: VAC Renaissance SE Phono stage with XLR Output Option & with Nordost Tyr 2 P/C and Tyr 2 XLR's.
Analogue Sources: SME 20/2 w/SME V arm & Nordost Valhalla TA cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote.
Vibration Control: TT on HRS M3X 1921 shelf, Stillpoint Ultra SS under dCS Transport, Stillpoint Ultra-Mini's under dCS 3 Stack. HRS NA100's under Ansuz D8 Power Distribution Bar.
Speakers: Wilson Audio Alexia in Argento Silver/Black grills.
Power Cables: 3 each 2.5M Nordost Odin Supreme Reference on amps & preamp. Nordost Valhalla V1 on dCS Transport.
Power Distribution Bar: Ansuz Mainz Diamond 8(D8) fed by Ansuz Diamond Power Cable.
Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2).
Speaker Cables: 3M Nordost Odin Supreme Reference with 4 Nordost Sort Lifts.
Signal Cables: Nordost Tyr 2 XLR's 2M on dCS Paganini and Mono amps. Nordost Valhalla 2's 110 ohm Digital AES/EBU on dCS internal connections and Crystal Cable Firewire 1394 cables on dCS.
Clock Cables: 3 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital
Headphones: Selling - 6M Cardas Clear HP cables. Vintage Koss Pro IV AA.
RCM: Audio Desk PRO
Tube Test Gear: Mint late '60's/calibrated Heathkit TT-1A & current SOTA MaxiMatcher Power and Preamp tube test sets.

Last edited by vintage_tube; 10-27-2017 at 12:01 AM.
Reply With Quote
  #144  
Old 10-26-2017, 05:43 PM
MisterBritt's Avatar
MisterBritt MisterBritt is offline
Senior Member
 
Join Date: Feb 2010
Location: Santa Fe, NM
Posts: 683
Default

Quote:
Originally Posted by vintage_tube View Post
Thanks for the safety info - I'm going all in for what I believe are my system weaknesses: power distribution, power & signal cabling, & finally electronic isolation.

I've addressed the following:

Power Distribution -- Ansuz Mainz D8 Power Distribution unit w/ceramic power cable & one Sparkz Harmonizer

Power Cabling - Nordost Odins on MC2301's & C1100. Still need to address Transport power cable (all dCS presently running stock cords & feel the only electromechanical device requiring immediate P/C addressing is the Transport).

Speaker Cabling: Nordost Odin 3M spade/spade

Clock Cabling: 3 Nordost Valhalla 110 ohm 1M

AES/EBU dCS Stack: Transport to DAC, Nordost 1.25M Valhalla 2

XLR Cabling from dCS DAC to C1100 and C1100 to MC2301's: Empowering Nordost trickle down ideology, so going with Nordost 2M Tyr 2's (these should be somewhat equivalent to Nordost Valhalla 1's).

Equipment Isolation: All in on Stillpoints. Ultra SS's w/adapters under MC2301's & dCS Transport. Ultra Mini's under C1100 and the 3 stack dCS (clock, DAC, Upsampler). Will utilize 3 HRS NA-150's between the stacked C1100T and 1100C.

Then I'm done until higher authority calls. It's been a fun ride since my teenage years and even more so since the advent of the Internet & forums such as AA. I've made a many purchases & a few mistakes, learned from them, but sort of tired chasing the merry go round -- and so, I'm concentrating on optimum finalization. I can see the light at the end of the tunnel so to speak. That's cool.

Best Sirs,

Bob
Fantastic! I daydream about addressing more or less everything at once and saying, No mas! I've got but one more component that needs Stillpoints and then I'm done with that. Then, perhaps, no mas for a while.

Is this most recently Stillpoints mother lode already accounted for in your profile signature and your most recent post? In other words, the MC2301s indicate they have Stillpoints Ultra SS on them. Were they there before this most recent delivery or are they inside the boxes that we see? Because I'm still trying to figure out where what I think are five sets of four Stillpoints are going.
__________________
McIntosh MP-1100 Phono Preamplifier; 60th Anniversary C-22 and MC-75s.

Last edited by MisterBritt; 10-26-2017 at 05:49 PM.
Reply With Quote
  #145  
Old 10-26-2017, 05:45 PM
Masterlu's Avatar
Masterlu Masterlu is online now
AA Founder, Legend AV Owner



 
Join Date: Apr 2009
Location: South FL & Cape Cod MA
Posts: 67,952
Default

Bob... enjoy your Audio (crack) purchase.
__________________
Ivan
FLORIDA
MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM SUBS(2) LUMAGEN RADIANCE SCALER, SONY VPH-G90U PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WIREWORLD PLATINUM CABLES
Reference System: ACCUPHASE A250 AMPS, C3850 PRE-AMP, DP950 CD/SACD TRANSPORT, DC950 DIGITAL PROCESSOR, DG-58 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS530 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WIREWORLD PLATINUM CABLES
CAPE COD

MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM SUBS(2) JL FATHOM F113 SUBS(4) SOUND ANCHOR STANDS(2) LUMAGEN RADIANCE SCALER, SONY VPH-G90U PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO, FORTRESS SEATING, WIREWORLD PLATINUM CABLES
Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, WIREWORLD PLATINUM CABLES
Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1/D1 STACK, G01X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113(2) SOUND ANCHOR STANDS(2) PS AUDIO P20, WIREWORLD PLATINUM CABLES

Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1 CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA PS8, WIREWORLD PLATINUM CABLES
Bryston/Esoteric System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS, BIT-15(2) AMR-DP777-SE DAC, SILENZIO, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WIREWORLD PLATINUM CABLES
Accuphase/Canton System: ACCUPHASE E-650 INTEGRATED, DP750 CD/SACD PLAYER, T1200 FM STEREO TUNER, PS530 POWER SUPPLY, CANTON REF K3, CANTON REF K5, SILENZIO, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X SHELVES, WIREWORLD GOLD CABLES
Bryston Active System: BP26 PRE-AMP, MPS2 POWER SUPPLY, BAX-1 CROSSOVER, BDA-3 DAC, BDP-3 PLAYER, BCD-3 CD PLAYER, BIT15(2), MODEL T ACTIVE SPEAKERS, 21B3 CUBED AMPS, SILENZIO, TARGET RACK, WIREWORLD SILVER CABLES
Reply With Quote
  #146  
Old 10-26-2017, 05:52 PM
vintage_tube's Avatar
vintage_tube vintage_tube is offline
BeurselfEvery1elseistaken



 
Join Date: Apr 2009
Location: East Coast
Posts: 8,518
Default

Quote:
Originally Posted by MisterBritt View Post
In other words, the MC2301s indicate they have Stillpoints Ultra SS on them. Were they there before this most recent delivery?
No, last night I had Stillpoints pre-delivery exuberance and updated my signature. As I type, they sit in their unopened boxes.

Best Sir,

Bob
__________________
Amps: Dan D'Agostino Progression Monos on 20A dedicated breakers.
Preamp: Dan D'Agostino Progression Preamp.
Digital Source: dCS Paganini 4 stack (Transport/DAC/Clock/Upsampler).
Analogue Preamp: VAC Renaissance SE Phono stage with XLR Output Option & with Nordost Tyr 2 P/C and Tyr 2 XLR's.
Analogue Sources: SME 20/2 w/SME V arm & Nordost Valhalla TA cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote.
Vibration Control: TT on HRS M3X 1921 shelf, Stillpoint Ultra SS under dCS Transport, Stillpoint Ultra-Mini's under dCS 3 Stack. HRS NA100's under Ansuz D8 Power Distribution Bar.
Speakers: Wilson Audio Alexia in Argento Silver/Black grills.
Power Cables: 3 each 2.5M Nordost Odin Supreme Reference on amps & preamp. Nordost Valhalla V1 on dCS Transport.
Power Distribution Bar: Ansuz Mainz Diamond 8(D8) fed by Ansuz Diamond Power Cable.
Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2).
Speaker Cables: 3M Nordost Odin Supreme Reference with 4 Nordost Sort Lifts.
Signal Cables: Nordost Tyr 2 XLR's 2M on dCS Paganini and Mono amps. Nordost Valhalla 2's 110 ohm Digital AES/EBU on dCS internal connections and Crystal Cable Firewire 1394 cables on dCS.
Clock Cables: 3 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital
Headphones: Selling - 6M Cardas Clear HP cables. Vintage Koss Pro IV AA.
RCM: Audio Desk PRO
Tube Test Gear: Mint late '60's/calibrated Heathkit TT-1A & current SOTA MaxiMatcher Power and Preamp tube test sets.
Reply With Quote
  #147  
Old 10-26-2017, 06:00 PM
vintage_tube's Avatar
vintage_tube vintage_tube is offline
BeurselfEvery1elseistaken



 
Join Date: Apr 2009
Location: East Coast
Posts: 8,518
Default

Quote:
Originally Posted by MisterBritt View Post
I'm still trying to figure out where what I think are five sets of four Stillpoints are going.
Easy Peasy answer --

4 each Ultra SS "black" w/adapters under the MC2301's (box 1 & 2)
3 each Ultra SS "silver" w/adapters under dCS Transport (box 3)
3 each Ultra Mini's "silver" under remaining dCS 3 stack (box 4)
4 each Ultra Mini's "black" under C1100C (box 5)

Best Sir,

Bob
__________________
Amps: Dan D'Agostino Progression Monos on 20A dedicated breakers.
Preamp: Dan D'Agostino Progression Preamp.
Digital Source: dCS Paganini 4 stack (Transport/DAC/Clock/Upsampler).
Analogue Preamp: VAC Renaissance SE Phono stage with XLR Output Option & with Nordost Tyr 2 P/C and Tyr 2 XLR's.
Analogue Sources: SME 20/2 w/SME V arm & Nordost Valhalla TA cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote.
Vibration Control: TT on HRS M3X 1921 shelf, Stillpoint Ultra SS under dCS Transport, Stillpoint Ultra-Mini's under dCS 3 Stack. HRS NA100's under Ansuz D8 Power Distribution Bar.
Speakers: Wilson Audio Alexia in Argento Silver/Black grills.
Power Cables: 3 each 2.5M Nordost Odin Supreme Reference on amps & preamp. Nordost Valhalla V1 on dCS Transport.
Power Distribution Bar: Ansuz Mainz Diamond 8(D8) fed by Ansuz Diamond Power Cable.
Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2).
Speaker Cables: 3M Nordost Odin Supreme Reference with 4 Nordost Sort Lifts.
Signal Cables: Nordost Tyr 2 XLR's 2M on dCS Paganini and Mono amps. Nordost Valhalla 2's 110 ohm Digital AES/EBU on dCS internal connections and Crystal Cable Firewire 1394 cables on dCS.
Clock Cables: 3 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital
Headphones: Selling - 6M Cardas Clear HP cables. Vintage Koss Pro IV AA.
RCM: Audio Desk PRO
Tube Test Gear: Mint late '60's/calibrated Heathkit TT-1A & current SOTA MaxiMatcher Power and Preamp tube test sets.
Reply With Quote
  #148  
Old 10-26-2017, 06:11 PM
jdandy's Avatar
jdandy jdandy is online now
Merry Christmas to all



 
Join Date: Apr 2009
Location: North Central Florida
Posts: 51,983
Default

Bob.......Congratulations on your move to Stillpoints. I am confident you will be impressed. It is a blast to go all-in at once. That's a home run over the center field wall. .
__________________
Dan



STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario
LIVING ROOM - McIntosh C2300, MC452, MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113
VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A
Reply With Quote
  #149  
Old 10-26-2017, 07:05 PM
vintage_tube's Avatar
vintage_tube vintage_tube is offline
BeurselfEvery1elseistaken



 
Join Date: Apr 2009
Location: East Coast
Posts: 8,518
Default

Quote:
Originally Posted by Masterlu View Post
Bob... enjoy your Audio (crack) purchase.


Best Sir & thank-you,

Bob
__________________
Amps: Dan D'Agostino Progression Monos on 20A dedicated breakers.
Preamp: Dan D'Agostino Progression Preamp.
Digital Source: dCS Paganini 4 stack (Transport/DAC/Clock/Upsampler).
Analogue Preamp: VAC Renaissance SE Phono stage with XLR Output Option & with Nordost Tyr 2 P/C and Tyr 2 XLR's.
Analogue Sources: SME 20/2 w/SME V arm & Nordost Valhalla TA cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote.
Vibration Control: TT on HRS M3X 1921 shelf, Stillpoint Ultra SS under dCS Transport, Stillpoint Ultra-Mini's under dCS 3 Stack. HRS NA100's under Ansuz D8 Power Distribution Bar.
Speakers: Wilson Audio Alexia in Argento Silver/Black grills.
Power Cables: 3 each 2.5M Nordost Odin Supreme Reference on amps & preamp. Nordost Valhalla V1 on dCS Transport.
Power Distribution Bar: Ansuz Mainz Diamond 8(D8) fed by Ansuz Diamond Power Cable.
Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2).
Speaker Cables: 3M Nordost Odin Supreme Reference with 4 Nordost Sort Lifts.
Signal Cables: Nordost Tyr 2 XLR's 2M on dCS Paganini and Mono amps. Nordost Valhalla 2's 110 ohm Digital AES/EBU on dCS internal connections and Crystal Cable Firewire 1394 cables on dCS.
Clock Cables: 3 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital
Headphones: Selling - 6M Cardas Clear HP cables. Vintage Koss Pro IV AA.
RCM: Audio Desk PRO
Tube Test Gear: Mint late '60's/calibrated Heathkit TT-1A & current SOTA MaxiMatcher Power and Preamp tube test sets.
Reply With Quote
  #150  
Old 10-26-2017, 07:28 PM
MisterBritt's Avatar
MisterBritt MisterBritt is offline
Senior Member
 
Join Date: Feb 2010
Location: Santa Fe, NM
Posts: 683
Default

Quote:
Originally Posted by vintage_tube View Post
Easy Peasy answer --

4 each Ultra SS "black" w/adapters under the MC2301's (box 1 & 2)
3 each Ultra SS "silver" w/adapters under dCS Transport (box 3)
3 each Ultra Mini's "silver" under remaining dCS 3 stack (box 4)
4 each Ultra Mini's "black" under C1100C (box 5)

Best Sir,

Bob
Indeed. The black ones are great for McIntosh! They weren't available when I started migrating to Stillpoints. You'll love them. Thanks for the update.

I'll be interested to hear your impressions when you get everything settled in. And no break-in period on Stillpoints -- better than new cables!
__________________
McIntosh MP-1100 Phono Preamplifier; 60th Anniversary C-22 and MC-75s.

Last edited by MisterBritt; 10-26-2017 at 07:32 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 05:45 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
ęCopyright 2009-2018 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Fortress
Fortress
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Acoustic Sciences Corportation
Acoustic Sciences Corportation
Legend Audio & Video
Legend Audio & Video
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Accuphase
Accuphase