#31
|
||||
|
||||
Will do. Won't have the E-270 until the 2nd week after the new year, so will be a few weeks.
In studying as much technical info as Accuphase gives one, it appears that the power supply and output stage for the E-270 & E-370 are identical other than the E-370 output devices are biased to supply an additional 10wpc. If correct, the upside with the E-270 is that its outputs are not driven as hard as the E-370. No big deal, I'm sure.
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#32
|
||||
|
||||
See attached images I took from the E-270 manual regarding A and B speaker connections. Hopefully that helps.
|
#33
|
||||
|
||||
Thank you.
My only question now is the size of the spades that can be used on the speaker terminals. Will have to see if mine fit when the E-270 arrives and change (or not) as necessary.
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#34
|
|||
|
|||
Glenn,
WireWorld spades should fit the terminals on the E-270 without any problems. |
#35
|
||||
|
||||
Thanks. At $2/ea, quite inexpensive for the gold-plated spades. Just ordered 16. Simple enough to reterminate and reheat-shrink the cable ends.
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#36
|
||||
|
||||
I’ll measure what I’m using and post the values. The banana connections on the screw down posts are what I’m going to use. It’s difficult to use speaker A posts with spades because of the B post proximity to the A posts. I’m using B because of this until I change to banana connectors.
|
#37
|
||||
|
||||
Hmmm.............. good to know. Thank you.
I'll use both. One set of cables with spades and the other with banana plugs. Interesting that the E-270 manual show's bi-wiring in a different manner than was recommended to me by Accuphase USA. Think I'll go with the manual.
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#38
|
||||
|
||||
Inside measurement of my Furutech spade connectors. They fit with room to spare around the back post.
Brian |
#39
|
||||
|
||||
Thank you. Your spades are 5/16". If plenty of room, then hopefully 1/4" will also work.
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#40
|
||||
|
||||
Actually I should of just measured the actual post.... will do that
|
|
|
Audio Aficionado Sponsors | |