#541
|
|||
|
|||
Rich,
I see your point! Jürgen |
#542
|
|||
|
|||
Well, I got my SP3 up and running. Many thanks to James Tanner and Mike Pickett for their patience in answering my questions. I use a Lumagen video processor as my source switcher, since all my sources are hdmi. The Lumagen
sends out a single HDMI output to the SP3, so in effect I have only one audio source. My next project is to resurrect my music server. I plan to use a Mac Mini with Amarra. It outputs its digital signal via USB. A few pages back I read about some problems with hi-res files going through the current USB input. There is a new Bryston unit that will change the USB signal to either AES or SpDif. Any opinions on whether I should get that unit and if so ,which input would sound better. Anybody think that its worth waiting for the upgraded USB board, whenever its ready? Finally, has anybody used the DACs in the SP3 for music, or have people used an outboard DAC and simply used the SP3 as an analog preamp? Thanks, David Shapiro |
#543
|
|||
|
|||
The main reason to buy the SP3 was it's very good reproduction of music via the internal DAC, in stereo and in surround.
So, yes, I use nearly always use the internal DAC of the SP3. As I have understood the new USB board will be available in the near future, so I think it's good to wait and see what it will bring. I only hope it can be installed by e.g. an importer or dealer or ... My SP3 is now away quite a while for repair and I don't want to miss it that long again for the new USB port. |
#544
|
|||
|
|||
"I only hope it can be installed by e.g. an importer or dealer or ..."
**** I hope that is a plug-in, user installable. |
#545
|
|||
|
|||
Quote:
james |
#546
|
||||
|
||||
SP3 & Media Server
James, I recently connected a Baetis Media Server to my SP3. It's a 3 zone set up and I have the multi channel music out of the Baetis HDMI into the SP3 HDMI 5. The SP3 will not see the signal with anything connected to any HDMI input. Also, no 192K through the HDMI input. I had to set the Baetis , which uses JRiver 18, to downres the input to 96K to use the SP3. Any suggestions ? And will the architecture of the SP3 allow for 192K through HDMI ? Firmware version u2012.05e, serial # 234. Thanks
|
#547
|
|||
|
|||
Quote:
Give Stan a call at Bryston. 1800 632-8217 james |
#548
|
||||
|
||||
Colekat... Welcome!
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#549
|
||||
|
||||
Thanks Masterlu, I am fond of great music, Cape Cod, and Southern most Florida ! I got engaged at Louie's in Key West, I got a good one, she let me set up the tunes in the main room of the house, WOW ! We are off next week to Orleans for a week of Sun and Ocean, and when we get back I hope to maximize our systems potential, but I'm gonna need some help!
|
#550
|
||||
|
||||
James, Clarification on the SP3 HDMI. My SP3 will not process 192k through the HDMI, no problem through the RCA SPDIF. And the Baetis will not be recognized if the input to my OPPO 83se is plugged in. It seems they will not handshake unless they are solo input to the SP3! Any suggestions? I have a great front end that sounds terrific through the SP3, however, the Baetis is quite the server and I hope to get maximum fidelity with them. 192k through the Baetis is outstanding, but I can't get them singing together.
|
|
|
Audio Aficionado Sponsors | |