#1
|
|||
|
|||
Tube in 801 Nautilus in or out?
There is a cover cap with a screw holding it in place, in the port, in the back of the 801 Nautilus cabinet.
It is there for shipping purposes. Inside is a metal tube. Should that tube be removed or left in place, when putting the speakers in service ? There is a rubber grommet with a metal cap to replace the parts that are removed. |
#2
|
|||
|
|||
c'mon... nobody know what I'm talking about?
Did I explain the question ok? |
#3
|
||||
|
||||
Is it a tube or a long screw? If the latter, loosen until it's loose then retighten until you feel resistance. Then a half turn to seat.
__________________
McIntosh MX150, C2300, MC601 (5), MC207, MCD12000, MR88, MPC1500, LB100, MCLK12. Anthem AVM 90. Lumin U1. Bluesound Node. Oppo 205. Bowers & Wilkins 800 D3, CWM8.3D, CCM7.5 S2. SVS SB16-Ultra (4). Shunyata. Wireworld. Transparent. GIK. |
#4
|
|||
|
|||
there is a screw to hold the cover plate in place when shipping and the tube is inside the cabinet. It covers the end of the mid range driver. I think it is protection while shipping but I'm not sure. The screw for the cover screws into the end of the driver. The tube is inside.
When you replace the protection cover, you put a rubber grommet with a metal cap, in place but there is no screw. |
#5
|
|||
|
|||
I can't remember but I know it's covered in the manual. See of you can find it online.
|
#6
|
|||
|
|||
__________________
Jack |
#7
|
||||
|
||||
I don't remember removing any parts except the transit screw and then replace with the supplied cover.
__________________
McIntosh MX150, C2300, MC601 (5), MC207, MCD12000, MR88, MPC1500, LB100, MCLK12. Anthem AVM 90. Lumin U1. Bluesound Node. Oppo 205. Bowers & Wilkins 800 D3, CWM8.3D, CCM7.5 S2. SVS SB16-Ultra (4). Shunyata. Wireworld. Transparent. GIK. |
#8
|
||||
|
||||
By the way - Congratulations on the B&W 801 Nautilus!
__________________
McIntosh MX150, C2300, MC601 (5), MC207, MCD12000, MR88, MPC1500, LB100, MCLK12. Anthem AVM 90. Lumin U1. Bluesound Node. Oppo 205. Bowers & Wilkins 800 D3, CWM8.3D, CCM7.5 S2. SVS SB16-Ultra (4). Shunyata. Wireworld. Transparent. GIK. |
#9
|
|||
|
|||
I guess it's not in the manual. Yes congrats on the new toys!
|
#10
|
|||
|
|||
... thanks for the replys.
the tube is to be removed when the speaker is in service. the Nautilus 801s sound quite good, especially the 15" driver. |
|
|
Audio Aficionado Sponsors | |