|
Audio Research State of the Art Audio Reproduction |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
ARC/DAW system impressions
I completed the transition to the latest SE components with an ARC upgrade of my CD9 to CD9SE. I acquired the 6SE in May and the 3SE in July. The DAW’s have been in since February. Couple of minor QA negatives from ARC. The 160S meters started behaving erratically and to ARC’s credit a new “160B” was substituted with meters sourced from a new supplier. Of course I was willing to have my unit fixed with new meters but that may not be possible. The new meters do not illuminate symmetrically, but that’s not worth pursuing. I have doubts about the longevity of these meters and the new ARC management may as well. My Phono 3SE was delivered, out of the box, with one channel on input 1 inoperative despite a QC card stating otherwise. The CD9SE, unlike my Ref Phono 2SE upgrade, was delivered without a new QC card or manual. Small things to be sure, but unlike any ARC experience I’ve had over a 40 year history with ARC.
Sonically the Ref 6SE is quite a departure from my 5SE and synergies much better with the 160S. Soundstage is more detailed and less recessed, but somewhat less warm than 5SE/75SE combination. Another interpretation would be more accurate. I do not listen in ultralinear mode so no comment. The 3SE has not delivered a “eureka” moment over the 2SE. In fact I cannot distinguish the difference which may be a limitation of my vinyl rig. The CD9SE actually sounds marginally better than the CD9, better imaging, clarity. Possibly new tubes are the answer to that. As an aside, the Wilson’s are truly superb in all parameters except the lowest registers of bass. They are the stars in my system. At this point I would have to say that while ARC gear remains a good value (compared to next price level gear), I have some concerns regarding the QC and longevity of current models. New management and time will tell.
__________________
Wilson Alexia V; ARC Ref 6SE; ARC Ref Phono 3SE; Boulder 1160; Esoteric K1X; Artisan Fidelity Garrard 301 Statement; Ikeda 407; Koetsu Leopard, Coralstone; Shunyata Denali 6000T; Shunyata AC cables; Siltech Prince speaker cables; Siltech Princess interconnects, Avondale II phono. |
#2
|
|||
|
|||
Looking great! Congrats on some fantastic gear. I know how good ARC and Wilson pair. Let's see a pic of the whole system!
Ps. Make sure you are using the 8 ohm tap... And like you, I'll be watching to see what changes are in store for the company. |
#3
|
|||
|
|||
Quote:
Some of your experiences with ARC QC sounds unusual although I've also heard about problems with their "ghost" meters. I've generally been very pleased with ARC's QC and service, although the few times there've been hiccups, they always make it right. Your impressions of the new SE components are spot on with my own. The 6SE is much better than the 5SE in the way you describe but the phono stage, not so much. A question: your rack is very neat but it looks like there is fairly minimal space around the components especially the Ref 6SE. Aren't you concerned about ventilation? Again, thanks for sharing. |
#4
|
|||
|
|||
Quote:
What kind of rack is that? |
#5
|
|||
|
|||
Zoethecus?
__________________
Wilson DAW, ARC 160M Mk 2, 250SE, Ref 6SE, Ref 3SE, CD9SE, VPI TNT6 w/rim drive, 12" Fatboy/3D/12.7, LP1 clamp, Lyra Etna Lambda SL, Kleos, Koetsu Onyx, Vermillion, U Gold, TA Gen 5 Reference cables, Shunyata Triton 2/Typhon, 2000T, Alpha PCs, Furutech NCF on 3 dedicated lines. Home Theater: Stewart 123" Firehawk, JVC RS-500, Panasonic 4K player, Marantz 8802a, Wilson Center3+surrounds, GoldenEar HTR7000, JL f113, Parasound A51 and Krell 250a/3. |
#6
|
|||
|
|||
Yes it is a Zoethecus with “Z slabs” I purchased new from them in 02 or 03. Sadly they went under but I’ve yet to find a stand as good that wasn’t stratospheric in price. It is a little tight up front but there is a couple of inches above and below the 6SE and 3SE. Here is a photo of the entire set up.
__________________
Wilson Alexia V; ARC Ref 6SE; ARC Ref Phono 3SE; Boulder 1160; Esoteric K1X; Artisan Fidelity Garrard 301 Statement; Ikeda 407; Koetsu Leopard, Coralstone; Shunyata Denali 6000T; Shunyata AC cables; Siltech Prince speaker cables; Siltech Princess interconnects, Avondale II phono. |
#7
|
|||
|
|||
Quote:
|
#8
|
|||
|
|||
Quote:
|
#9
|
|||
|
|||
Great setup and thx for sharing. DAW is an exceptional speaker. I am just surprised about your comment for low frequencies. Normally, it’ si very deep, detailed and fast, so for sure you need to search where you can improve your system because the problem doesn’t come from thé DAW ..
|
#10
|
|||
|
|||
The DAW does not extend as low in the bass as the Alexia 2 which I auditioned as well, and the difference is easily appreciated. The bass of my DAW is limited by positioning needs.
__________________
Wilson Alexia V; ARC Ref 6SE; ARC Ref Phono 3SE; Boulder 1160; Esoteric K1X; Artisan Fidelity Garrard 301 Statement; Ikeda 407; Koetsu Leopard, Coralstone; Shunyata Denali 6000T; Shunyata AC cables; Siltech Prince speaker cables; Siltech Princess interconnects, Avondale II phono. |
|
|
Audio Aficionado Sponsors | |