|
Shunyata Research Designing Silent Systems for recording, film and music |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
From Transparent to Shunyata?
Hey Gang,
I've been away quite a while putting my life back together after divorce. So, I'm no longer in Westchester, NY; I'm in Hawaii. And thankfully, I'm in a far better place now. The system will be shipped here to my newly purchased home within the next several months. I CAN'T WAIT!! But... Before the divorce, I was toying with the notion of swapping out all my Transparent Cables for Shunyata. As an engineer by trade, I was enamored with Shunyata's R&D that was always available for public consumption, versus "proprietary" processes always kept secret by other high end cable manufacturers. Has anyone ever moved from Transparent Audio Reference to Shunyata? If so, I'd love to hear all about it. This is my current system make-up: Lamm Industries L2 Meitner MA-1 DAC Aurender A10 Music Server Lamm M1.2 Reference Mono Amps Wilson Audio Sasha W/P Silent Running Audio Scuttle 3 Silent Running Audio VR Series IsoBases Transparent Audio PowerIsolator MM Transparent Audio PowerIsolator 8 Transparent Audio Reference XLMM2 RCA IC Transparent Audio Reference Balanced ICs Transparent Audio Reference XLMM2 Spkr Cable Transparent Audio PowerLink Premium Power Cords Thanks in advance... |
#2
|
|||
|
|||
That's a great system line up and I can definitely relate on the personal life aspects.
I cannot comment on TA specifically however I can tell you all about great musical results finally achieved after trying many other brands over a couple decades and coming back to Shunyata digital and power cables and also their industry leading power conditioners. My whole system is anchored on Shunyata and Elrod cables and I say that will not change. Happy to share thoughts offline by phone, etc... |
#3
|
|||
|
|||
I have all Shunyata power products and all TA analog signal products which reflects my experience of each’s strengths. If you want to fry Shunyata I would recommend starting with their power products,cables and conditioners.
|
#4
|
||||
|
||||
Interesting question. I have been told that the Transparent Gen 5 has been a huge jump for Transparent. So, if you were going to upgrade, now would be the time to ask the question and change camps if appropriate. I was upgrading components as I upgraded my Transparent, so I can’t really say anything about Mm2 to Gen 5... I also went from RCA to XLR.
__________________
George Main: Aurender W20SE music streamer, ARC REF 9SE DAC / CD, Linn LP 12, Koetsu Rosewood SignCartrige, ARC REF 3 Phono Stage, ARC REF 6SE Preamp, ARC 160s amp, Sonus Faber Amati Traditional Speakers,Transparent Ultra IC & SC Library:Aurender N100, Ayre QB9 2020 DAC, Woo WA5-LE amp upgraded tubes, Focal Utopia HP, Sennheiser 800s HP, LCD HP. |
#5
|
|||
|
|||
I would make sure that you are able to audition any cable changes you are going to make at length. I've had Transparent, Shunyata and MIT all in my system and between me and my wife and my son we could never agree on which was best as they are all very different for sure! In my opinion all great cables so more personal preference and system synergy.
BTW ... I won since it was my system :-) George |
#6
|
|||
|
|||
Quote:
|
#7
|
||||
|
||||
I also own Lamm M1.2’s and Wilson Alexia. I have XLG5 signal cables which I upgraded from RefMM2. For many years I had all Shunyata power products. A few years ago I demo’ed the TA G5 power cords starting with the Reference thru Opus against Shunyata Sigma HC, Digital and Analog power cords. Each TA cord was not surprisingly better than the next and I preferred the sound of the Reference to the Sigma. I now have TA XLG5 power cords and XL power isolators the PIXL replaced Triton V3 and Typhon for sources and Denali for amps.
TA recently announced the Gen 6 version of their signal cables which means the power products in their Ref and up will be released in the future. I likely will not upgrade the signal cables due to the cost. I would suggest you demo their G5 Ref and XL cords against the latest Shunyata Sigma and your existing cords. I found each other’s cords were not compatible with the others power conditioners so I compared direct to the wall for sources and amps. |
#8
|
||||
|
||||
Shunyata's power products have improved with new technologies since Sigma HC. If you haven't heard the Noise-Reduction technology on their current series of power cords, you definitely should. This technology evolved out of their Clear Image Scientific Division, where their technology is used for cardiac imaging, where the data from using conventional cables is obscured by noise.
Why is this important in audio? A quote from Caelin on this: "The design of a power cable can significantly affect the reactance of these signals within the power supply. The power cable is effectively part of the primary winding of the power transformer. The transition between the various metals used in a power cable and its connectors can cause electromagnetic reflections and diode-like rectification of the noise impulses as they propagate away from the power supply. If the power cable presents a high impedance to these signals they will be reflected back into the power supply where they will intermodulate, thus increasing the high frequency noise levels of the component. Most power supply filters are ineffective at blocking very high frequency noise components and much of it is passed through to the DC rails." The NR filters on the Shunyata PCs prevent this from happening, so that the power distribution chain stays as clean as possible from these noise components. You can visually see the impact of this in the cardiac traces above. Shunyata's cable lineup from the Alpha line and higher have proprietary technologies that address the principal class of noise components for each cable type. Specifically:
As always, my recommendation would be to rent in, and see what works for you in your system and your room.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components. Last edited by Puma Cat; 04-22-2021 at 06:51 PM. |
#9
|
|||
|
|||
I moved from Transparent to Shunyata on my three pieces of dCS gear but stayed with Transparent on my amps and pre-amp. At this time I have no interest in making additional changes.
|
#10
|
|||
|
|||
I wouldn't want to "fry" shunyata, but I agree with everything else Adam said here
|
Thread Tools | |
Display Modes | |
|
|
Audio Aficionado Sponsors | |