#1
|
|||
|
|||
REL Carbon Special
I took the plunge and ordered 2 RELs Carbon Special
I plan to follow REL's instructions of hooking these up via High Level Input to each of the MC611s, and XLR LFE input to the 2 Marantz 8805 sub outs. Does any of you have similar hook up in their system with the Carbon Special who can share their insights (Dos / Donts)? I reached out to McIntosh (Chuck Hinton) and he initially recommended to hook up the REL via Low Level RCA inputs to the preamp variable outs and did not recommend using the speaker level connection on MC611. I then sent him the note published by REL on the preferred method of connecting to monoblocs using high level input, and he replied in his email that either approach is ok, and it's up to me to decide. I wonder if anyone of you have first hand experience on either approach, and what is the best way to connect the RELs to the MC611s and 8805A surround processor. Any guidance is much appreciated Many thanks.
__________________
Amps: Mc611s; Bryston 9BST Speakers: B&W 802D3, HTM1D3, B&W SCMs, 2x REL Carbon Special + Analysis Plus REL SpeakOn cable; Pre-Amp: C2700; Processor: Marantz 8805A Sources: Aurender N20; PSA Directstream DAC; JVC RS2000; Stewart Screen Cabaret with StudioTek 130 G4; Oppo UDP-205; Power & Cables: Taralabs bi-wire; WW XLR Silver Eclipse 8; WW Silver Starlight 7 Coax; Denali 6000T, Shunyata Alpha, Delta and Venom. |
#2
|
||||
|
||||
Quote:
Hi, you'll be very pleased with your new pair! The most important upgrade of our system we made the last years. For stereo, the high level input is preferred. That is what our dealer suggested (and he's REL's favourite dealer of my country). I was surprised that we only had to dial the volume at +/- 25%. I think we ended at about 35-37 Hz. For surround, we went with RCA-cables from our Marantz 8802A sub outs. It's all working very well, you don't hear the subs (until you turn them off!), you just feel them (at high volumes). Good luck! PS. There was only one negative: we had to wait 4 months...
__________________
Stereo: Hegel H590, Grimm Audio MU1, Mola Mola Tambaqui, Burmester 948 - V3 & V6 racks, Vivid Audio G2 Giyas, REL Carbon Special (pair), Silent Angel Bonn N8 Ethernet Switch & Forester F1, Wireworld Platinum Eclipse IC and SE SC, Furutech Digiflux AV: Hegel C-53, Marantz AV8802A, Oppo BDP-203EU, Pioneer Kuro 60", Vivid Audio C1 & V1w's, Wireworld Platinum Eclipse, SE & E Second system (veranda): Halgorythme preamp and monoblocks, Burmester 061, Avalon Avatar, Sharkwire & Wireworld cables |
#3
|
||||
|
||||
Excellent choice. I have a single Carbon Special, also connected via high level from my D’Agostino Momentum S250. This is my 6th REL over the years, with a variety of amps, and I’ve always used the high level inputs except for surround use, then low level from the theatre processor.
__________________
Tony D'Agostino Momentum S250 MxV & HD pre; Linn Klimax Organik DSM, SonicTransporter, EtherRegen; Acoustic Signature Typhoon Neo, Koetsu RSP, Boulder 1108; Sf Il Cremonese; Shunyata Everest, Altaira, Sigma & Alpha v2 |
#4
|
|||
|
|||
Thank you Tony and Bart.
and thanks for confirming that you are hooking these up via High level cables. I can't wait and hope it will arrive next week. It will be a fantastic Christmas
__________________
Amps: Mc611s; Bryston 9BST Speakers: B&W 802D3, HTM1D3, B&W SCMs, 2x REL Carbon Special + Analysis Plus REL SpeakOn cable; Pre-Amp: C2700; Processor: Marantz 8805A Sources: Aurender N20; PSA Directstream DAC; JVC RS2000; Stewart Screen Cabaret with StudioTek 130 G4; Oppo UDP-205; Power & Cables: Taralabs bi-wire; WW XLR Silver Eclipse 8; WW Silver Starlight 7 Coax; Denali 6000T, Shunyata Alpha, Delta and Venom. |
#5
|
||||
|
||||
Ditto. 2 different sets of RELs with high level inputs. Not with McIntosh amplifiers, but great results (and super easy to dial in).
|
#6
|
||||
|
||||
Awesome. Please give us a full report after they break-in.
__________________
Jazz Junkie Magico M3s; Vitus Masterpiece Components; TechDAS Air Force One; 2 x SME 3012-R; Airtight Opus 1 and MSL Platinum Signature; Taiko Audio Extreme + Switch; Albedo Metamorphosis Signature cables. |
#7
|
|||
|
|||
Thank you all. Will report back once received and dialed in.
__________________
Amps: Mc611s; Bryston 9BST Speakers: B&W 802D3, HTM1D3, B&W SCMs, 2x REL Carbon Special + Analysis Plus REL SpeakOn cable; Pre-Amp: C2700; Processor: Marantz 8805A Sources: Aurender N20; PSA Directstream DAC; JVC RS2000; Stewart Screen Cabaret with StudioTek 130 G4; Oppo UDP-205; Power & Cables: Taralabs bi-wire; WW XLR Silver Eclipse 8; WW Silver Starlight 7 Coax; Denali 6000T, Shunyata Alpha, Delta and Venom. |
#8
|
||||
|
||||
I’m just trying to learn more about REL. the idea of the 6 pack intrigues me.
So - from what I gather on this thread, you connect REL sub with a small wire that comes off your amp (while your speaker cables also go from the amp to the mains- And then you connect either RCA or XLR from your video processor at the same time? In other words, when listening in two channel, the subs are activated from the high level, but then when watching a movie, they play from the LFE out on your processor?
__________________
Main > Aurender N10/N100 / Antipodes K50 > Aries Cerat Kassandra mk2 - Playback Designs Dream DAC > D'agostino Momentum HD > PS Audio P10 > D'Agostino S250 > Sonus Faber Aida / REL S812 Six Pack + 4 JL Audio F113 Fathoms > B&W Signature HTM > Anthem Statement D2v > Mcintosh MC205 > Focal 1000 (side surrounds) > Bryston TIW (rear surrounds) Secondary System > Aurender N100h> AMR777SE > D'agostino Momentum Integrated > Wilson Sasha DAW |
#9
|
||||
|
||||
Quote:
With amps whose (-) terminal is not at ground, you either leave the ground wire floating or connect it to a chassis ground screw.
__________________
Main System: Amati Futura Mains Amati Homage VOX Center, Proac Response 1sc Rears, Three MC2301's for L,C,R MC 602 for the rears C 1100, MX 151, MCD 1100, MR 80 Nottingham Dais with Wave Mechanic Sumiko Palo Santos Presentation SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material. Lake House: Ohm F, MC 275V, C2300, MR 77, Rega P3 OnDeck: McIntosh MAC 4300v |
#10
|
||||
|
||||
I was looking at REL's. This is the response I go from customer service regarding mono blocks:
"Thank you for your interest in REL. If planning to use a single REL with monoblocks, you must use a low level RCA connection via the preamp instead of high level. If connecting a pair of REL's via high level to the MC2301's, the BLACK wire should be left disconnected from a negative speaker terminal. You would connect the RED and YELLOW wires of each sub to the 8 ohm positive tap on each amp for best output. Please let us know if there is anything else at all that we can assist with, and thank you again for considering our products."
__________________
[list] Analog: VPI Prime Signature Turntable in Rosewood, Ortofon Cadenza Bronze, Digital: Aurender N10, Holoaudio KTE May, Oppo 203, Preamplifier: Luxman C-10X, Parasound JC3 Jr, Amplifier: Luxman M-10X, Speakers: Bowers & Wilkins 801 D4, Power Management: Audioquest Niagara 5000, Cables: Nordost Tyr 2, Wireworld Eclipse 7 & 8, , Rack: Core Audio Designs plyKraft 3L (x2) |
|
|
Audio Aficionado Sponsors | |