programing (with code) MC CD301 in a Control MA7000

[tdelahanty]

Originally Posted by jdandy

Tom.......Thanks for adding that. I wasn't even thinking about the Data cable between the MA7000 and the MCD301. That will most likely solve the issue.

Dan: if the buss protocals are the same for the MCD500 and 301 it will work fine. I enjoyed full control of the amp and cdp from one remote. "way cool"

[mati1979]

today i have conected a 2 mini plug cables
1) CD Data
2) Power control conector

now all equipments turn on automatic if i push ON

but....

a control HR070 not work very good with cd player

For example only i can do: play / stop / pause this is normal ?

advance track not work "<< >>"
and "display" not work
and "level" not work

(yes work good if i use a original control cd301)

Matias

[jdandy]

mati1979.......Make sure you are using a stereo mini plugs like the manual says.

[mati1979]

yes Dan, for example

i can control a "Level + -" in a cd 301 using a advance track "<< >>" in a Control Remote

(a "LEVEL" in a control not work...)

[Ron-C]

Data cables used with McIntosh preamps control the function of McIntosh source components. Just follow the outline in the owner's manual.
The MA7000 to CD control will allow basic operation of MCD301. You should be using the Fixed audio outputs of the MCD301 to CD input of MA7000 and use the volume control of MA7000 to adjust volume for best sound.


Thanks,

[mati1979]

Originally Posted by Ron-C

The MA7000 to CD control will allow basic operation of MCD301.

yes Ron, im using output fixed but another functions in a cd 301?
display, advance track, random, programs tracks, etc ?

[Ron-C]

For more extensive control you will need the MCD301 remote control.

Thanks,