AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Ayre

Ayre A new dimension of musical enjoyment

Reply
 
Thread Tools Display Modes
  #1  
Old 07-04-2018, 11:25 AM
Blackstone Blackstone is offline
Guest
 
Join Date: Apr 2013
Location: USA
Posts: 224
Default Single Ended to Balanced Cables

I have QX-5 Twenty and AX-5 Twenty. Between the two units is single ended interconnect. I am told balanced is the way to go.

Has anyone made the change from single ended to balanced cables and if so, could you describe the change in sound? Thank you.
Reply With Quote
  #2  
Old 07-04-2018, 03:45 PM
Rex Anderson Rex Anderson is offline
Guest
 
Join Date: Oct 2016
Location: Las Vegas, NV
Posts: 173
Default

For the cost of a pair of XLR cables, you should try it for yourself and see which you like better.

Some folks say single ended sounds better sometimes.

You can get some Mogami 2549 XLR cables made by Redco, not expensive, but very good cable. If you like the sound of balanced connection better, you can go down the rabbit hole of "better" (read: more expensive) balanced cable.
Reply With Quote
  #3  
Old 07-04-2018, 05:06 PM
The Lost Bears's Avatar
The Lost Bears The Lost Bears is offline
Senior Member
 
Join Date: Apr 2012
Posts: 383
Default

Unless you use the same cable for both balance and single ended interconnects, it is not really a fair comparison.

I have always felt that balanced cables sound quieter in my system. But I think it depends on whether your gear is truly balanced or not. My gear is truly balanced and balanced cables sound better to me.
Reply With Quote
  #4  
Old 07-04-2018, 06:29 PM
Rex Anderson Rex Anderson is offline
Guest
 
Join Date: Oct 2016
Location: Las Vegas, NV
Posts: 173
Default

You can make unbalanced cables using any balanced cable if you feel the cable itself makes a difference.
Reply With Quote
  #5  
Old 07-05-2018, 06:36 AM
SCAudiophile SCAudiophile is offline
Guest
 
Join Date: Sep 2016
Location: Greenville SC
Posts: 4,531
Default

Not all single ended cables can be made into truly balanced cables from what I was told. Sure you can take the RCA connectors off and slap on a pair of XLRs but you might not get a truly balanced cable.
Reply With Quote
  #6  
Old 07-05-2018, 07:55 AM
audio bill's Avatar
audio bill audio bill is offline
Senior Member
 
Join Date: May 2013
Location: Chicago suburbs
Posts: 1,641
Default

Quote:
Originally Posted by SCAudiophile View Post
Not all single ended cables can be made into truly balanced cables from what I was told. Sure you can take the RCA connectors off and slap on a pair of XLRs but you might not get a truly balanced cable.
That's true, for example a coaxial single ended cable cannot be made into a balanced cable since it only has two conductors. On the other hand a balanced cable (which has to have at least three conductors) can be made into a single ended cable by combining some conductors.
Reply With Quote
  #7  
Old 07-05-2018, 09:58 AM
GSOphile GSOphile is online now
Senior Member
 
Join Date: Jul 2017
Location: NC
Posts: 553
Default

I believe most Ayre gear is fully balanced internally, a premium design with double the components vs. single ended. So if you use a single ended cable to communicate with a fully balanced unit, the single ended signal will be converted to balanced internally before it's processed (and converted to single ended prior to output on single ended cable) - unnecessary step(s) if you use balanced interconnects. The reverse is also true of other manufacturers who offer balanced connections into units that are not fully balanced internally. This is one reason why manufacturers (other than for long cable runs, which favor balanced) may favor one interconnect implementation over the other.
Reply With Quote
  #8  
Old 07-05-2018, 07:42 PM
Rex Anderson Rex Anderson is offline
Guest
 
Join Date: Oct 2016
Location: Las Vegas, NV
Posts: 173
Default

What would be the benefit of balancing the unbalanced line at the input of the next stage? The idea is to use a balanced line from the source output to the next stage input so it is balanced all the way. You're trying to keep the path balanced from output to input to avoid hum and RF being induced in the cable. If the signal is unbalanced at the source output and using unbalanced cable to the next stage input, what's the point of turning it into a balanced signal once it's in there?
Reply With Quote
  #9  
Old 07-05-2018, 08:22 PM
GSOphile GSOphile is online now
Senior Member
 
Join Date: Jul 2017
Location: NC
Posts: 553
Default

If both components are fully balanced internally, there is no point in using an unbalanced IC (and forcing each component to do an internal conversion). Likewise, if both components are single ended internally, there is no point in using a balanced cable to connect them (unless there is an overriding need to take advantage of a balanced cable's noise cancellation properties over a long cable run). This was the point I was trying to make.
Reply With Quote
  #10  
Old 07-05-2018, 08:33 PM
Rex Anderson Rex Anderson is offline
Guest
 
Join Date: Oct 2016
Location: Las Vegas, NV
Posts: 173
Default

I understand. Blackstone's original question is whether to use unbalanced or balanced interconnects and he's using unbalanced now.

It seems he should be using balanced. Thanks for clarifying how Ayre handles it's inputs.

Last edited by Rex Anderson; 07-07-2018 at 10:18 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 06:38 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video