#81
|
||||
|
||||
Quote:
To maintain a continuous 20A rating - a minimum of 12 gauge is required. The internal PS8 wiring consists of dual 12 gauge for an aggregate 09 gauge.
__________________
Caelin Gabriel President Shunyata Research |
#82
|
|||
|
|||
Better w/ time....
Thus far the Denali seems to be better after a few weeks. Very rich & Fluid.
|
#83
|
|||
|
|||
Quote:
|
#84
|
||||
|
||||
DENALI Europe
Quote:
What do you mean by Eiger 1000. Do you mean a single outlet device? If so, many people are using the D2000/T for a single component. It is not less expensive for us to make a single outlet Denali versus a 2-outlet. For example many people with mono-block amplifiers are using one each D2000/T for the amplifiers. We have decided not to rebadge the Denali for Europe. The EU Denali will also be called Denali. Although there are many internal differences - the chassis of the EU Denali will be the same as the US version except for the back panel, of course. We will also offer all three models for the EU: D6000/T, D6000/S and D2000/T Since DC offset is a big problem in Europe: The EU Denali may be offered with an optional DC Blocker circuit. We have prototypes of the EU Denali in the process of being CE certified. We anticipate shipping EU Denali early next year.
__________________
Caelin Gabriel President Shunyata Research |
#85
|
|||
|
|||
Quote:
Yes, I was referring to a single outlet, in the belief that it might be cheaper. Since the cost of manufacturing is the same, two better than one. In fact, we have a good problem with DC Offset. I was not conscious While I had Audio Research amplifiers, but when I switched to Constellation, The transformer made a big hum. Fortunately I could solve it, With an Isotek Syncro, but it would not be bad to fix it with a Denali (all in one). If you were so kind, I would like to know why, when switching voltages, there are That make so many internal changes. And if the SQ is the same. Thank you |
#86
|
||||
|
||||
Quote:
__________________
Caelin Gabriel President Shunyata Research |
#87
|
||||
|
||||
I dare not ask about UK models...
__________________
Avid Acutus SP, NO ARM, Benz Micro LP-S, Whest Audio PS.40RDT SE, PS Audio DSMP+DS DAC, Simaudio Moon 700i, Dali Epicon 6, Simaudio Moon Nēo 430HAD, HiFiMan HE-1000v2, Chord Sarum SA XLR, RCA, USB, Chord Sarum speaker, Nordost Vishnu power, Furutech plugs, PS Audio P10+Chord Sarum SA power, Stillpoints Ultra SS, Ultra Mini and LPI, HiFi Racks rack, Audio Desk Systeme PRO+Keith Monks Omni RCM |
#88
|
|||
|
|||
Quote:
BTW, do you also offer the DC-offset blocker as a separate unit? Greetings, Gerard Last edited by GerardJ; 12-11-2016 at 06:20 PM. |
#89
|
|||
|
|||
I bought the D2000 to try the arrest the high gain issues my goldmund monos have in its pairing with the ARC pre amp...
My current uncomfortable solution was to not ground the power cables of the power amp which made me a little fearful.. Sadly, it's didn't solve the issues which I suspected all along... The positive part is that the difference is fairly substantial with the monoblocks into the D2000.... Tighter Low end and better instrument separation. And the difference is almost immediate... the improvements are fairly substantial to make me accept the matching flaws...it's that good... |
#90
|
|||
|
|||
Quote:
I need this DC-filter! I can hardly wait... Regards, Gerard |
|
|
Audio Aficionado Sponsors | |