|
Shunyata Research Designing Silent Systems for recording, film and music |
|
Thread Tools | Display Modes |
#19
|
|||
|
|||
Quote:
After I read and learn a bit more about the different Shunyata power distributors, I thought perhaps a simpler solution to my problems of not having enough sockets/outlets for my gears with only the Denali, is to consider the Triton v3 with its 8 sockets which I believe would serve me well for next several years with the gears I have or plan to add. From what I read, I believe the Triton v3 would have higher overall performance (NR, CCI, Transient/dynamics etc..) than the combo Denali + PS8, and the additional cost vs. the Denali + PS8 may be “reasonable” If I opt for the Triton v3, what would you recommend to connect it to the wall (Alpha vs. Sigma, NR vs. EF)? For Amps and Sub, it would be NR cables (either Alpha or Delta) to the Triton, and for Sources, it would be EF (Alpha or Delta). Or would you recommend to all NR cables for all gears? Please let me know your thoughts, and recommendations. Much appreciated. Thanks. Thanh
__________________
Amps: Mc611s; Bryston 9BST Speakers: B&W 802D3, HTM1D3, B&W SCMs, 2x REL Carbon Special + Analysis Plus REL SpeakOn cable; Pre-Amp: C2700; Processor: Marantz 8805A Sources: Aurender N20; PSA Directstream DAC; JVC RS2000; Stewart Screen Cabaret with StudioTek 130 G4; Oppo UDP-205; Power & Cables: Taralabs bi-wire; WW XLR Silver Eclipse 8; WW Silver Starlight 7 Coax; Denali 6000T, Shunyata Alpha, Delta and Venom. Last edited by btn2803; 11-29-2018 at 02:31 PM. |
|
|
Audio Aficionado Sponsors | |