|
McIntosh Audio A Tradition of Excellence |
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
I've had zero issues with drop outs on my MB50 after over a year of use. My only gripe is that I'd like to use my MacBook Pro instead of my iPhone from which to stream music. So far, that appears not to be possible.
|
#22
|
|||
|
|||
Thanks for replies.
Very happy with the performance of the MB-50 with wired connection. However, every time I turn the system on (via APC H10 surge protector/power conditioner) I have to reset the MB50 to establish connection to the network. The fastest way I've found so far is to disconnect and then immediately reconnect the ethernet cable to the unit. Obviously not ideal! Question: is there a way to keep the MB50 connected to the ethernet without keeping it powered on (i.e. connected to the mains)? Thanks, wikksmith |
#23
|
|||
|
|||
Quote:
Resetting to Factory Default Settings 1. With the MB50 On, press and hold in simultaneously the INPUT and STANDBY/ON Push-buttons. 2. Release the Push-buttons when the Front Panel LEDs start flashing. 3. Press the STANDBY/ON Push-button and refer to page 14 to re-establish communications with your Mobile Device. Once it is restarted wait until the WiFi light slowly pulses then go through your normal setup procedure. Last edited by jayvis; 09-25-2018 at 09:21 AM. |
|
|
Audio Aficionado Sponsors | |