|
#1
|
||||
|
||||
Anyone Here Shoot Precision Rifle?
I own and shoot many different types of guns, but I seem to get the most enjoyment out of shooting long range rifle. I'm fortunate enough to have a private range within 15 minutes of my home that has multiple platforms to shoot from. All of them have steel targets placed at various distances. Depending on the platform, I can shoot steel from 100-1375 yards. I love trying to place a relatively small group on a steel target at 900 yards, watch the impact through the scope, and hear the "gong" a few seconds later.
In the photo below, I'm shooting my Tikka Sporter chambered in .223. It's an awesome factory gun and groups well at 800 yards. I've taken it out to 1007 yards with great success, although the little 77gr bullet gets pushed around quite a lot at the distance. The rifle in the background is a Surgeon Scalpel in 6.5 Creedmoor. [IMG][/IMG]
__________________
Regards, Terry Last edited by Azbiker; 02-21-2018 at 12:45 PM. |
#2
|
|||
|
|||
very nice Terry, other than you and I , Glenn is into long range shooting as well. We'll see how many others chime in.
My passion has been varmint hunting, my longest kill on a whistle pig is 749 yds, obviously I've yet to make the 1000 yd club. Weapon of choice is .243 Ackley. The gun was 'smithed' by Clarence Hammonds using McMillian Tooley MBR stock, Rem 40x, Shilen , jewel trigger, Nikon optics. |
#3
|
||||
|
||||
Very nice setup you have Dave. A ground hog at 749yds is an awesome shot. You obviously reload. I have in the past, but was out of shooting for a number of years and had sold all of my equipment. One of the reasons I shoot 6.5CR is the availability of consistent factory match ammo.
__________________
Regards, Terry |
#4
|
|||
|
|||
Yes Terry reloading is not only a pleasure but a must since my Ackley is a tight neck chamber (.264). My other varmint rigs were/are .223's, 22-250, 220 swift.
While I no longer do, I shot 100 yd benchrest for years (6ppc) |
#5
|
||||
|
||||
Nice!! Looks like your .223 rig would also work well for F-T/R. I really like the 'no recoil' of a .223. I recently built a single-shot R700 (40-X) in .223 with a Bartlein 5R barrel for F-T/R https://www.audioaficionado.org/show...?t=4683&page=5. However, BPCR & BPTR (200yd to 1000yd) are my first loves (along with sporting clays in the winter), so not sure how many times I'll get out to the F-Class matches. We have a 600yd range at my home range (~20min from the house) and Bridgeville, DE has 1000yd. Have another three 600yd ranges within 2hr, so plenty of places to shoot. The upside is the barrel will last a long time if I don't shoot it. I'm just getting started on a ladder-test for the rifle and have both the tipped and traditional 77gr SMK, 80gr A-Max & SMK, 80gr, 80.5gr, 82gr & 90gr Berger to test. Berger's generally fly best for me, but one never knows until they do the test. Had the chamber cut for 80gr & 90gr bullets for 800yd+, but the 77s may do what's needed at 600yd. Wanted to get out in our record 73F temps today but it was so windy it would have been a waste of ammo.
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag Last edited by Formerly YB-2; 02-21-2018 at 09:19 PM. |
#6
|
||||
|
||||
Quote:
I don't reload so I miss out on all of your bullet choices, but I have been incredibly satisfied with my results shooting Prime 77gr Match Plus. My gun really prefers it when compared to Hornady or Blacks Hills 75gr Match.
__________________
Regards, Terry |
#7
|
|||
|
|||
So jealous of the range. Looks like a literal blast!
|
#8
|
||||
|
||||
I do feel fortunate to have range so close where I can safely shoot steel at longer ranges. We're working on getting state approval to place targets out to 2400 yards. Below is a pic of our son shooting the IPSC style target at 1375 yards. It is a smaller one at 18" tall x 12" wide. The winds were pretty favorable that day so he was ringing it with one of my 6.5CM's.
The target is located down towards the base of the sand colored hill in the red circle. [IMG][/IMG]
__________________
Regards, Terry |
#9
|
|||
|
|||
I was into long range varmint hunting back in the 80,s & early nineties with my father in FT. Hunter Ligget where you could easily have a 1500 yard shot if you and your weapon was capable of it which mine where. The weapons of choice were a switch 25-06 Ackley Improved & 30-06 Ackley Improved built on Old Winchester action with Shilen Heavy barrels, unscrew one barrel and screw in the other depending upon what your target and distances where with all handholds of course with 90 gr ballistic tip for the 25 and 165 gr Barnes for the 30 man was that riffle accurate. The other everyday rifle was a custom 220 swift Hart heavy barrel on a Remington action using 52 grain Ballistic tips both were fiberglass stocks.
Ft Hunter Liggett at that time anyways was open to hunters on the sections that were open I believe their was 15 sections open with all kinds of squirrels, Bobcats, Lynx, Coyotes, Pigs a varmint hunters paradise which varmint hunting was illegal at the time. Not even sure Hunter Liggett is still open for hunting. We would camp out on the coast at Naciemento camp grounds then get up early and drive over the hill onto Liggett and let the fun begin. Miss those times long ago.Thanks for the memories. |
#10
|
||||
|
||||
Quote:
I had a Weatherby 25-06 and still own a Weatherby 30-06 from the mid 1980's. I still remember the day I sighted the 30-06. I was done after 10 rounds due to flinching, although I shot it recently and it didn't seem as bad as I remembered. I have two 6.5 Creedmoors. One weighs in at 17lbs and the other is around 15 lbs so I really don't experience much recoil at all.
__________________
Regards, Terry |
|
|
Audio Aficionado Sponsors | |