AudioAficionado.org  

Go Back   AudioAficionado.org > Audio & Video > Headphones, Personal Listening Gear

Headphones, Personal Listening Gear Personal Listening at its Best

Reply
 
Thread Tools Display Modes
  #11  
Old 10-27-2018, 12:49 PM
Robert_Anderson's Avatar
Robert_Anderson Robert_Anderson is offline
Senior Member


 
Join Date: Nov 2010
Location: Poland
Posts: 3,499
Default

Quote:
Originally Posted by Jack in Wilmington View Post
I noticed that Music Direct has the Musical Fidelity MX-HPA headphone amp with balanced inputs on sale, but I need 2 sets of balanced outputs on my pre amp because my Bryston DAC is plugged into the one set on my current pre.
Ivan was able to get XLR Wireworld cables for me that had two connectors to one output. They worked well, I used them when I was on the ship and wanted to split outputs to two XLR input headphone amps.
__________________
Poland:
Silenzio, Simaudio, Luxman, Bricasti, Bryston, Shunyata, Stax, Meze, Linn, Audeze, and Dan Clark Headphones, Stax, Wireworld, Crystal, Nordost, Siltech.

Home Main System:
Magnepan 20.7, Pass Labs XA 100.5, Audio Research Reference 6, Esoteric P-03, D-03, G0-Rb, DV-60, Clearaudio Innovation & Tangent arm, VPI HW19 MK4 & ET 2.5 arm, Mark Levinson 37, Aesthetix Rhea Signature, Magnum Dynalab Etude, Kiseki PHS, Sumiko Palos Santos Presentation,Wireworld, Crystal Absolute Dream, Shunyata, Acoustic Zen, and Stealth cables

Other
Avalon Arcus, Snell Type AIII, Tympani IV, Green Mountain Europa, Martin Logan CLS, Tympani 1D, Counterpoint, GAS, Yamaha, Levinson, Perreaux, Proceed, Theta, Linn, and other collectibles, including 60 different headphones and 30+ headphone amps, over 60 cartridges, and too many cables, stands, and tweaks to list.
Reply With Quote
  #12  
Old 10-27-2018, 12:52 PM
Robert_Anderson's Avatar
Robert_Anderson Robert_Anderson is offline
Senior Member


 
Join Date: Nov 2010
Location: Poland
Posts: 3,499
Default

Quote:
Originally Posted by mulveling View Post
Without having a dedicated source for each speakers and headphones, and without dual XLR outputs on your sources or preamp, you're going to be making a sacrifice (i.e. at a minimum an extra connection) for one or the other.

I'm not sure I'd ever want to run a preamp into a headphone amp (which has its own volume control), though I know some do that with a tube pre to fatten up the sound, and if you need input switching to a common set of sources then that pushes the point.

Lots of balanced headphones amps do have an XLR loop-output, but the downside is that you inject and extra set of connections before your amp & speakers. And since most audiophile have much more invested in speakers, that may not be an acceptable compromise.

I think the better scenario for your setup is to make use of the existing RCA output, and massage it to work for your new balanced headphone amp. A few balanced headphone amps have differential inputs that can take a single-ended input with NO performance penalty - examples of this include the upcoming new Headamp GS-X mini, and almost any Stax amp. If you get one of these amps, you're golden! Other balanced amps cannot do this, and require a balanced input for best performance - examples of this are the older Headamp GS-X (Mk I and Mk II) amps, and the Headroom Balanced amps. If you get one of the latter amps, an option is to insert a Jensen ISOMAX transformer that will convert and SE signal to balanced XLR. I've used these to good effect. It's better to not have to use them, but I've heard them improve performance for amps like the Headrooms and older Headamps that would otherwise have been handicapped by a SE source.

BTW there is a Headroom Balanced Home (Max modules) on US Audio Mart for an absolutely screaming deal right now ($625). Beautiful sounding balanced amp that sounds like it costs $4K; I still enjoy mine on occasion with Sennheisers despite also running a top-tier $20K Stax setup for my main headphone rig. This Headroom amp also pairs superbly with Focal Utopias. Also pick up some Jensen ISO-MAX for like $225, and you can be done with a top-tier headphone amp for so little cash.
I'm having difficult issues running the output of my Bryston BDA-3 and Esoteric K-03. I am trying to run one output from a headphone amp into my integrated Moon Evolution with one set of XLR inputs. I know that all cables are good as is all the equipment, but I'm missing the output of the right channel. I checked everything exhaustively. I suppose I have to pull every cable and start over..................
__________________
Poland:
Silenzio, Simaudio, Luxman, Bricasti, Bryston, Shunyata, Stax, Meze, Linn, Audeze, and Dan Clark Headphones, Stax, Wireworld, Crystal, Nordost, Siltech.

Home Main System:
Magnepan 20.7, Pass Labs XA 100.5, Audio Research Reference 6, Esoteric P-03, D-03, G0-Rb, DV-60, Clearaudio Innovation & Tangent arm, VPI HW19 MK4 & ET 2.5 arm, Mark Levinson 37, Aesthetix Rhea Signature, Magnum Dynalab Etude, Kiseki PHS, Sumiko Palos Santos Presentation,Wireworld, Crystal Absolute Dream, Shunyata, Acoustic Zen, and Stealth cables

Other
Avalon Arcus, Snell Type AIII, Tympani IV, Green Mountain Europa, Martin Logan CLS, Tympani 1D, Counterpoint, GAS, Yamaha, Levinson, Perreaux, Proceed, Theta, Linn, and other collectibles, including 60 different headphones and 30+ headphone amps, over 60 cartridges, and too many cables, stands, and tweaks to list.
Reply With Quote
  #13  
Old 10-27-2018, 03:34 PM
Jack in Wilmington's Avatar
Jack in Wilmington Jack in Wilmington is offline
Audio Enthusiast

 
Join Date: Jun 2012
Location: Wilmington, De.
Posts: 1,018
Default

Quote:
Originally Posted by Robert_Anderson View Post
Ivan was able to get XLR Wireworld cables for me that had two connectors to one output. They worked well, I used them when I was on the ship and wanted to split outputs to two XLR input headphone amps.
But wouldn't you just get the left channel or the right channel depending on which output you choose?
__________________
Speakers........Dynaudio Contour 1.8 Mk II
Amp...............Pass Labs X150.5
PreAmp..........McIntosh C2600
Sources..........Music Hall MMF 9.3 Walnut w/ Goldring
Eroica LX MC Cartridge
Phono Pre...…..Sutherland Insight

CD Player Rotel RCD-1072
Record Cleaning Machine...….Okki Nokki
DAC................Bryston BDA-3
Headphones.....Drop + Dan Clark Audio Ether CX /
Sennheiser HD-660S
Headphone Amp.....Bryston BHA-1
Cables....Amp to preamp - Morrow MA4
Preamp to DAC - Morrow MA4
Preamp to Headphone Amp - Morrow MA2
Reply With Quote
  #14  
Old 10-28-2018, 08:35 AM
Robert_Anderson's Avatar
Robert_Anderson Robert_Anderson is offline
Senior Member


 
Join Date: Nov 2010
Location: Poland
Posts: 3,499
Default

I did a fairly thorough check and know that all my cables and equipment are fine. I suppose I will disconnect everything. I think the problem is my attempt to run both headphone amps in line, and the Stax has no XLR out. I've obviously done something wrong.
__________________
Poland:
Silenzio, Simaudio, Luxman, Bricasti, Bryston, Shunyata, Stax, Meze, Linn, Audeze, and Dan Clark Headphones, Stax, Wireworld, Crystal, Nordost, Siltech.

Home Main System:
Magnepan 20.7, Pass Labs XA 100.5, Audio Research Reference 6, Esoteric P-03, D-03, G0-Rb, DV-60, Clearaudio Innovation & Tangent arm, VPI HW19 MK4 & ET 2.5 arm, Mark Levinson 37, Aesthetix Rhea Signature, Magnum Dynalab Etude, Kiseki PHS, Sumiko Palos Santos Presentation,Wireworld, Crystal Absolute Dream, Shunyata, Acoustic Zen, and Stealth cables

Other
Avalon Arcus, Snell Type AIII, Tympani IV, Green Mountain Europa, Martin Logan CLS, Tympani 1D, Counterpoint, GAS, Yamaha, Levinson, Perreaux, Proceed, Theta, Linn, and other collectibles, including 60 different headphones and 30+ headphone amps, over 60 cartridges, and too many cables, stands, and tweaks to list.
Reply With Quote
  #15  
Old 07-03-2019, 12:13 AM
rrwwss52 rrwwss52 is offline
Junior Member
 
Join Date: Jun 2019
Posts: 16
Default

Quote:
Originally Posted by Jack in Wilmington View Post
I'm looking to upgrade my headphone amp and was thinking about going balanced. How can I hook up a balanced headphone amp if I only have one set of balanced outputs on my preamp?
Split Balanced cables. Blue Jeans Cable custom makes them and utilize Belden 1508A wire. Basically a y-cable with XLRs. I have four of them (2 sets for each channel).
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 04:52 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video