[jdandy]

bvlaw.......Here are the actual specifications for the PS Audio P5 and P10 AC regenerators.


P5 Specs:

Dimensions 17” W x 14” D x 4” H
Weight 37 lbs.
Nominal Input Voltage 95-145 (US) 200-285 VAC (Europe/Asia)
Maximum Continuous Load 1000VA (US) 1500VA (Europe/Asia)
Maximum Peak Load 1200VA (US) 1800VA (Europe/Asia)
Dynamic Power Delivery 0.5 second> 3600VA 9US) 5000VA (Eur./Asia)
Voltage Regulation +/- 0.5V (US) 1Vac (Europe/Asia)
Output Distortion Input 220-240VAC 1200VA Resistive Load <0.9%
Output Distortion 230V 240VAC 1200VA Reactive Load <0.9%
Output Distortion Input 110-130VAC 1200VA Resistive Load <0.5%
Output Distortion Input 110-130VAC 12000VA Reactive Load <0.5%
Output Impedance <0.0015 Ohm
Noise Reduction (all zones) 100KHz-2MHz >80dB
Efficiency @ 1200VA Resistive Load > 85% Reactive Load > 85%
Input Frequency 45-56Hz
Under Voltage Limit Continuous= -10% of setting, 15 Sec Duration= -15% of setting
Over Voltage Limit Continuous= 5% of setting, 15 Sec Duration= 10% of setting
Protection Modes L-N, L-G, N-G
Energy Dissipation 2440J (US) 3670J (Europe/Asia)
Peak Current Surge 144,000A (US) 84,000A (Europe/Asia)
Max Surge 6,000 Volts
Clamp Level 330V (US) 800V (Europe/Asia)
Telco Protection 320 Joules 395 volts
Coax Insertion loss <1dB



P10 Specs:

Dimensions 17” W x 14” D x 8.5” H
Weight 73 lbs.
Nominal Input Voltage 95-145 (US) 200-285 VAC (Europe/Asia
Maximum Continuous Load 1200VA (US) 1800VA (Europe/Asia)
Maximum Peak Load 1500VA (US) 2000VA (Europe/Asia)
Dynamic Power Delivery 0.5 second> 3600VA (US) 5000VA (Eur./Asia)
Voltage Regulation +/- 0.5V (US) 1Vac (Europe/Asia)
Output Distortion Input 220-240VAC 1200VA Resistive Load <0.9%
Output Distortion 230V 240VAC 1200VA Reactive Load <0.9%
Output Distortion Input 110-130VAC 1200VA Resistive Load <0.5%
Output Distortion Input 110-130VAC 12000VA Reactive Load <0.5%
Output Impedance <0.0015 Ohm
Noise Reduction (all zones) 100KHz-2MHz >80dB
Efficiency @ 1200VA Resistive Load > 85% Reactive Load > 85%
Input Frequency 45-56Hz
Under Voltage Limit Continuous= -10% of setting 15 Sec Duration= -15% of setting
Over Voltage Limit Continuous= 5% of setting 15 Sec Duration= 10% of setting
Protection Modes L-N, L-G, N-G
Energy Dissipation 2440J (US) 3670J (Europe/Asia)
Peak Current Surge 144,000A (US) 84,000A (Europe/Asia)
Max Surge 6,000 Volts
Clamp Level 330V (US) 800V (Europe/Asia)
Telco Protection 320 Joules 395 volts
Coax Insertion loss <1dB
DC Trigger configured Tip Positive
DC Trigger Voltage 5-15 volts dc