ERROR EVALUATION In order to guarantee flawless operation and optimum protection of your valuable headphones, the V281 is equipped with various protection circuits: - the delayed activation of the headphone outputs upon power-up prevents your headphones from potentially adverse signal peaks from the preceding circuitry. In a similar manner, the headphone outputs are instantly disconnected when turning power off. - Adverse DC voltage should be kept from your headphones at all times. If DC is detected, the headphone outputs will be disconnected, indicated by the red “MUTE” LED flashing and the green “HEAD” LED lit. The detection interval is about five seconds. If DC disappears during this period, the unit will resume normal operation automatically. - Overloading (i.e. increased distortion) must be avoided in favour of your headphones as well. If overload is detected, the headphone outputs will be disconnected, indicated by the red “MUTE” LED flashing and the green “LINE” LED lit. The detection interval is about five seconds. If overload conditions resolve during this period, the unit will resume normal operation automatically.
FACTORY RESET of all software based settings can be done by pushing the “XLR” button during powering up.
|