And wtb just to share, by changing the stock fuses to audiophile grade fuses make pretty significant improvement, mainly better dynamics, lower noise floor, and cleaner resolution.
On the 1050, there's an internal fuse (T10A 32mm for the 240V version)
And for the 2000, there are 2 external fuses on the back panel, and 1 internal fuse. (2 x T10A 20mm + 1 x T12A 32mm for the 240V version)
The fuse ratings are different for the 110V version.
Warning: note the stored power in the APS even when not connected to the mains. As a safety measure, fully drain the battery before opening the unit, by simply unplugging from the mains, and connect a lamp or electrical device to the APS till it runs out. Also as an added measure, upon opening the unit, unplug the black/red connections to the internal battery before touching anything else.
|