Thread: SSP-800 Issue
View Single Post
  #2  
Old 06-23-2016, 09:52 PM
Sharp 1080's Avatar
Sharp 1080 Sharp 1080 is offline
Lifetime audio addict!
 
Join Date: Sep 2009
Location: Dallas, Texas
Posts: 525
Default

Quote:
Originally Posted by multiham View Post
Have owned my Classe gear (SSP-800 and CA-5200) since 2010. Went to watch a movie yesterday and the SSP-800 was totally dark. I Power Cycled the unit by turning it off in the back, pulling the power plug, and waiting 5 minutes before starting it again. When that did not work, I pulled the fuse above the power connection and tested it. The fuse is good. I also tried a different power cord and a different wall outlet without success.

I will be calling the dealer I bought it from when they open on Monday.

Is there anything else that I should try? I do not want to open the unit as I will get it professionally looked at. Thought maybe someone else had experienced this and has a suggestion.

Thank you!

Steve
Hi Steve, It sounds as if you have done all you can do. I had a similar type of problem with my SSP-800. I had the screen but no response when touched. The screens do fail but not often. It was shipped back to Canada for repair. That was two years ago. Great sounding unit. I am still happy with mine. Good luck and keep us posted.
__________________
Source Esoteric K-01X
Preamp Audio Research REF 10
Amplifier D'Agostino Progression monoblocks
Speakers Wilson Audio Maxx 3
Cables Transparent Reference Gen 5
Equipment rack and amp stands HRS
Power conditioning Transparent
Power outlets GTX-D(G) Gold-Plated duplex receptacles dedicated 20 amp lines.
Reply With Quote