View Single Post
  #67  
Old 08-25-2019, 04:26 PM
Puma Cat's Avatar
Puma Cat Puma Cat is online now
Cool, calm scientist
 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,944
Default

Quote:
Originally Posted by Tie_breaker View Post
Hi Harbeth owners, I just purchased a pair of Super HL5 plus 40th anniversary edition. My room is 12 x 20. I have to use the long wall and need to have my rack towards the middle of the long wall. I would appreciate your advice on placement. How far apart should the speakers be, distance from back wall, listening position etc? I have them on 18 inch high stands.
Thank you in advance..
Hi Tie,
By using the long wall, I presume you mean that the speakers will be placed along the long wall.

For my 30.2s, I have them 32" from the edge inner rear cabinet edge to the "front wall" (the wall that is behind the speakers). I have toed them in a bit, so the distance from the corner of the outer part of the rear cabinet is ~35". I followed Harbeth's recommendation, which was to place them 2M apart. I just measured mine with the usual set-up I use, and with the toe-in they're set to, the center of the front baffles are 6ft, 6 inches apart, which converts to...1.9812 meters. So...pretty dang close to Harbeth's recommendations.

Also, within the general guidelines provided by Harbeth, I sit about 7 feet in front of them (7 ft, 6 inches, to be exact).

Here's a pic that would be representative of what you would see from my usual sitting position.


I sometimes pull them out and have them firing down the "diagonal" of my listening space because there is less of a back wall for the right speaker to have its output reflect off of, and create thus create a null mode in the FR.

Your stands sound to be just about the right height for Super HL5+.

Hope this helps...

-Stephen aka the 'ole snuggle-toothed, gamy-legged Puma Cat.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.

Last edited by Puma Cat; 08-25-2019 at 04:31 PM.
Reply With Quote