Quote:
Originally Posted by enatai252
My system has changed since that post, I now use just the MXR20s-but when I had both amps...I had two separate balanced IC runs from the preamp- 1 set to each amp pair. I also had two separate speaker runs going to each speaker. So to swap from the Ayre to the ARC I would power down the Ayre, swap the speaker connectors at speaker end....power up the ARC
I still stop by and listen to the M400s occasionally
|
Wow, that's the same scenario I was thinking, or having both cables wired up, but using the P10 with zones disabling the power to the unused system. Though there is always a risk of having both powered on.
Having the same amplifier for the L/R does make it easier, even if you two seperate preamps.
Got the hots for the M400s uh?