D1000RC Integrated Stereo Tube Amplifier
100 watts per channel, hi-performance sound, this is characteristic of Vacuum Tube Technology in the JD 1000RC. Clear, robust bass with smooth highs in a value priced package. Remote volume control and an EZ-Biasing system make the operation and the maintenance of the JD 1000 RC a simple matter.
Construction Details and Features:
Fully Integrated Stereo Amplifier: Input 500mV driving 100 watts, maximum 150 watts output
Remote Control
Multiple Inputs: Front mounted selector switch-CD, Tape Recorder, Tuner and Aux. (for TV, VCR or Computer)
Bypass Switch: This feature enables the amp to be use as a power or integrated amplifier
Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design. Secondary can be configured for a 4 ohm or 8 ohm load
Easy Biasing with top panel bias testing terminal with bias adjustment controls.
State of the Art Components: Blue ALPS audio potentiometer, gold plated RCA input jacks and one set of XLR
Technical Specifications:
Maximum Power Output: 150 W per channel at 8 ohms, 1KHz
Rated Output Power: 100 W per channel at 8 ohms, 25Hz to 70KHz
Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB
Bandwidth: 13Hz to 80kHz + 3dB; 0dB 100 W 1KHz
Distortion THD: Less than 1% at 100 W output, 28Hz to 15KHz
Circuit Type: Ultra Linear, Class AB
Input Impedance: 100Kohms
Input Sensitivity: 500mV at 1KHz and 8 ohms for 100 watt output
Output Impedance: 4 ohms and 8 ohms
Negative Feedback: Less than 5 dB
Noise and Hum: 85dB below rated output
Tube Complement: 4 matched pairs (8) of 6CA7/EL34 power output; 2 pcs. 12AX7 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers.
Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option)
Dimensions: 17 1/8 inches wide by 16 inches deep by 9 7/16 inches high
Weight: 62 pounds net, approximately 74 pounds packaged
Warranty: Two year limited parts and labor. One year or 1000 hours whichever comes first on Jolida Tubes.
Bias Settings: 400 millivolts + 40 mV
Fuse: 110 - 120 VAC, 6.3 Amp Fast Blo; 200 - 240 VAC, 3 Amp Fast Blo
|