Specifically then, from your previous post I believe you have a B&W DB1 subwoofer.
If that is correct, then from the manual it states that both the mono input and the stereo input can be setup independently of each other.
Therefore in a home theater setup you would connect the subwoofer output of your HT preamp to the subwoofer's input.
When listening to your C2500 in 2 ch stereo, you would use one of the stereo outputs, Output 1 or 2 (I assume the mains go to the amplifier that connect to the 802's) and run a line to the stereo inputs on the DB1.
Then you would use the menu of the DB1 to set the parameters of each input to what you want, the mono for home theater use, and the stereo for 2 channel listening.
If it is a different subwoofer, let us know.
__________________
Analog Sources: Oppo 203, Oppo 105, DirecTV, AppleTV 4K, Roku Ultra, Nvidia Shield
Digital Sources: Aurender W20 via USB and dual XLR, dCS Rossini and Clock
HT Processor: Anthem AVM90
PreAmp: Audio Research Ref 6
Amp: ML 536 (2), Rotel 1552 (3), Rotel 1585
Speakers: Focal Maestro EVO, Focal 1000 Utopia Center, Focal 1000 IW6 side/rear surrounds, Focal 1000 IW6 X4 Ceiling, Rel G2 X 2 subs, Martin Logan 1500 X 2 subs, B&W 805D2 in master bedroom
Video: JVC NZ8 Projector
Power: Shunyata Everest, Sigma XC (1), Sigma NR (1), Sigma Analog (2), Alpha HC (2), Alpha Digital (2), Alpha Analog (1), Viper(1), Venom Digital(1)
Cables: Shunyata Anaconda SC, Anaconda IC (2), Shunyata Sigma USB, Shunyata Sigma XLR X 2, Shunyata Sigma Ethernet, Shunyata Clock Alpha X 2, Sigma x 1
Last edited by edward3132; 03-14-2017 at 08:34 PM.
Reason: to correct some errors
|