Yeah there are two electrolytic caps in the white cardboard box - should be a 10.5 and a 4 uF. So, if you swap them out then you will probably need to go with a 10 and 3.9uF. A lot of good options here depending on what your budget is. At the very least you could grab a multimeter and test that their values are +/-10%.
Quote:
Originally Posted by 62caddy
Thanks!
You are correct about the MDF. Fortunately it is only used on the front and rear panels; the rest is solid 1/4" plywood. Very nicely made overall.
As far as the crossover goes, there don't seem to be any caps that I can see. What do you think?
|