[AM123]

This is exactly what my clearaudio Goldfinger statement manual states.

Generally 47 kohms is recommended for most tube equipment.

Loading between 100 ohms and 1 kohms may be used for some solid state for best results. We strongly suggest starting at 47 kohm loading down until breaking in has been completed.

We achieved the best results with a loading of 200 ohms.


So, I have the c2500 and my choices are 50 ohm, 100 ohm, 200 ohm, 400 ohm, 1000 ohm.

To me 1000 ohm is too bright. Is 47 kohm that they mentioned in the manual, 50 ohm? Or 5000 ohm, which I do not have access to?