Quote:
Originally Posted by RoadDawgWest
ronenash,
If one would use a voltmeter, would the voltage readings needs to be converted to decibels?
|
Since you only need to match the level between the channels the actual "volume" of the signal is not important. You need to get the same voltage reading for both channels. If the azimuth is not correct there will be a difference between channels. Try changing the azimuth in one direction and measure again. If the difference between channels is smaller you are in the right direction. If not change azimuth in the other direction. This take time and patience but you can reach perfect azimuth once you get the hang of it.