[tigerhonaker]

Guys,

Sorry don't have my camera back yet so .........

I only have a few pictures taken by another person ata Hotel in Warsaw, IN.

Thought some of you might like to see what was done to my 2008 Bullitt Mustang recently.


The below picture is what it use to look like before the latest changes at Brenspeed Engineering & Performance.






Here are those pictures and yes it was, "Dirty" I just picked it up.

















































Below will be as complete a list as I can think of.

Here is a list of what was done to the 2008 Bullitt Mustang at BRENSPEED.

Guys,

Below is a list as best as I can do for what was done at Brenspeed.

It is very possible I might not have everything listed but at least it is complete for the most part.

I also have included Links to information on some of the items.

Thought some of you might be interested so as I said I have included them.

I Do-Not have the camera it is in the Bullitt still at Brenspeed.

Brent had it, (Bullitt Mustang) picked up to do the Final-Tuning etc. on it.

(1) Complete Roush Supercharger set-up.
http://www.brenspeed.com/05-08-mustang-power-adders-roush.html

(2) Ford Racing Stage 3 Racing CNC complete heads (Heads include Phaser Limiters).
http://www.brenspeed.com/m-6050-463vp3.html & http://www.brenspeed.com/m-6049-463vp3.html

(3) Innovators 18% overdrive pulley.
http://www.brenspeed.com/805.html

(4) Roush 2.75 racing supercharger pulley.
http://www.brenspeed.com/spine275r23003v.html

(5) Comp Cams #127450 (Require HD Springs & Phaser Lock-Outs)
http://www.brenspeed.com/127450.html

(6) Seibon SS-Style Carbon Fiber Hood.
http://seiboncarbon.com/store/produc...d-mustang.html

(7) Custom Side Graphics in Matte finish.

(8) Stage 3 Motorsports, 2005-2009 Ford Mustang UPR Billet Radiator Hood Pin Hold Down Kit (Black)
http://www.stage3motorsports.com/1056-09-2005-2009-Ford-Mustang-UPR-Billet-Radiator-Hood-Pin-Hold-Down-Kit-Black.html

(9) Roush Mustang Rear 3-Piece Spoiler (2005-2009) {Painted Highland Green}
http://www.roushperformance.com/parts/Mustang-Rear-Spoiler-2005-2009.html

(10) Roush Emblem 1 (for under hood located on front of Trans. Catch Can)
http://www.roushperformance.com/parts/ROUSH-Fender-Badge.html

(11) Yellow Top Battery.
http://www.brenspeed.com/05-08-mustang-electric-batteries.html

(12) Lakewood Battery Relocation Kit (2005-2009)
http://www.brenspeed.com/30301.html
(George installed on Left Rear so Shaker-1000 Sub-woofer enclosure stayed)

(13) Canton Ice Tank, New Custom Bracket to Locate in Old Battery Location painted to match Bullitt.

(14) Meziere 300 Series Electric Water Pump for Supercharged Application,
http://www.brenspeed.com/wp346s.html

Built to Flow 55 Gallons Per Minute!
http://www.jegs.com/p/Meziere/Meziere-300-Series-Electric-Water-Pumps/756625/10002/-1

(15) Steeda Billet Lower Trailing Arms.
http://www.brenspeed.com/555-4405.html

(16) Ford Racing Differential Cover.
http://www.americanmuscle.com/frpp-88-diff-cover.html

(17) 40 amp Kenne Bell boost a pump for Dual-Pumps.
http://www.brenspeed.com/kb89069.html

(18) Roush Mustang (Trac Pac) High Performance Brake Kit - 6 Piston w/ 14" Rotors.
http://www.brenspeed.com/403144.html

(19) Ford Racing (Rear-Only) Brenspeed Special made up kit for me from Stop-Tech to match the front Roush system.
http://www.brenspeed.com/m-2300-t.html
(New Stainless Braided Brake Lines front & rear)

(20) Raxiom Gen-5 Tail Lights (05-09 All)
http://www.americanmuscle.com/raxiom-gen5-taillights-0509.html?utm_content=raxiom-gen5-taillights-0509&utm_campaign=ShopzillaBasicFitment&utm_source =Shopzilla&utm_medium=Shopping&AMID=raxiom-gen5-taillights-0509-2008-BaseFitment&year=2008&model=

(21) The Driveshaft Shop Carbon Fiber One Piece Driveshaft (05-10 GT)
http://www.americanmuscle.com/dss-cf-driveshaft-0510gt.html?utm_content=GSBasicFitmentV1&utm_campa ign=60982307482-avshop&utm_source=Google-pla&utm_medium=Shopping&utm_term=&adpos=1o1&networ k=g&AMID=dss-cf-driveshaft-0510gt-GSBasicFitmentV1&year=2005&adtype=pla

(22) Seibon SS-Style Carbon Fiber Hood, (Center Section) painted to match Bullitt.

Also the Roush 3-Piece rear spoiler painted to match Bullitt.

Both also had two coats of clear applied.

(23) 2005-2014 MUSTANG SVT Performance Electric Cooling Fan M-8C607-MSVT
2005-2014 MUSTANG SVT Performance Electric Cooling Fan M-8C607-MSVT

(24) The other things that will be done are as follows.
Changing the TCI Superstreet Fighter tranny fluid & filter using ONLY TCI Max Shift & Ford OEM Filter.
http://www.tciauto.com/tc/tcir-max-shifttm-break-in-transmission-fluid-3-gallonshtml/

Changing/Flushing complete Brake-System & installing Racing Brake Fluid.
Changing Rear-End Fluids & replacing with FRPP "ONLY" products with New Ford Racing rear-diff cover.

(25) ROUSH Mustang Hood Struts 2005-2013 Mustangs.
http://www.brenspeed.com/421236.html

(26)
Model: Mustang Engine: 4.6 3V OHV(w/ Roush Super Charger)

6G Alternator 130 AMP (large case) #2158WR(2158WR)
http://www.paperformance.com/scripts...?idproduct=380

(27) Autometer Sport-Comp Monster Shift-Lite Tachometer 5"
http://www.summitracing.com/parts/atm-3905/overview/

(28) Roush Polished Billet Strut Tower Cap Kit.
ROUSH Polished Billet Strut Tower Cap Kit 2005-2010 Mustang

(29) All Polished Steeda Billet Pulleys.
http://www.brenspeed.com/nsearch.htm...35773164622644

(30) Custom BRENSPEED Name Plates with Specs.

Note, The above Roush Hood Struts are or have already been removed.

Seibon says not to use them on their Carbon Fiber Hoods so they are being replaced with the Chrome Hood Brace from (UPR).
http://www.uprproducts.com/mustang-c...op-rod-05.html

They also had to order the correct radiator side panels that are for the Hood-Support-Rod.
http://www.americanmuscle.com/radiat...ver-black.html

Terry aka "tigerhonaker
__________________
NMRA 2011 World Finals 10.32 ET Pass @ 135.56 MPH
[ame="http://youtu.be/VPs42Mkw-7U"]20111002114957 - YouTube[/ame]
BuildThread http://www.imboc.com/forums/showthread.php?t=176176