AudioAficionado.org

AudioAficionado.org (https://www.audioaficionado.org/index.php)
-   Wilson Audio (https://www.audioaficionado.org/forumdisplay.php?f=66)
-   -   willson sophia ii vs iii , 89 vs 87 db ? (https://www.audioaficionado.org/showthread.php?t=48105)

mati1979 05-19-2020 02:12 PM

willson sophia ii vs iii , 89 vs 87 db ?
 
Hi, I read many different things about the two models.

I had sophia 2 with pass labs int30A he handled them very well.

Is the new model 3 more efficient? I read that the woofer is softer but the medium harder :scratch2:

W9TR 05-19-2020 09:01 PM

I owned the Sophia II for many years. It’s a very good loudspeaker. I think if you are looking to upgrade and you like the Sophia II you should consider other models in the Wilson lineup instead of an updated Sophia.

mati1979 05-19-2020 11:15 PM

Quote:

Originally Posted by W9TR (Post 1005196)
I owned the Sophia II for many years. It’s a very good loudspeaker. I think if you are looking to upgrade and you like the Sophia II you should consider other models in the Wilson lineup instead of an updated Sophia.

Isn't it an improvement to go for 3?

W9TR 05-20-2020 08:42 AM

Wilson always launches significant upgrades when the change models, so yes, there will be a definite improvement.

mati1979 05-20-2020 10:35 AM

Sophia 2 Sensitivity: 89 dB
Sophia 3 Sensitivity: 87 dB

W9TR 05-20-2020 12:47 PM

willson sophia ii vs iii , 89 vs 87 db ?
 
I don’t know - I also sold my Sophia 2 and I have not heard the Sophia 3 so can’t say. The 2 dB sensitively reduction I wouldn’t think would be a big problem. I didn’t push my Sophia 2’s that hard - rarely got over 30 watts and they were really loud.

audiohippo 05-30-2020 08:41 PM

Sophia 2
Sensitivity: 89 dB
Nominal Impedance: 4 ohms (3 ohms minimum)
Minimum Amplifier Power: 12 WATTS per channel

Sophia 3
Sensitivity: 87 dB
Nominal Impedance: 4 ohms / 3.1 ohms minimum
Minimum Amplifier Power: 25 WATTS per channel

Pass Labs Int30A
30 watts into 8 ohms
60 watts into 4 ohms

Which means:
57 watts produces 97dB with Sophia 2 @ 3M/10Feet
57 watts produces 95dB with Sophia 3 @ 3M/10Feet

If you listened to music between 75-85dB it would only need 1-9 watts!

Calculations using https://www.crownaudio.com/en-US/too...power_required

mati1979 02-06-2021 09:12 AM

hi, I asked the factory and they replied:


" The sensitivity’s are the same between the Sophia Series 2 and Series 3. The Series 2 was measured at a voltage of 2.83 volts - the Series 3 was measured at a voltage of 2.0 volts. When you bring in the 4 ohm impedance, the 2.83 volts adds 3 dB.

Hence, they are the same."

did someone hear them ?

Formerly YB-2 02-06-2021 01:12 PM

google the reviews for same and read about. Art Dudley reviewed both (if memory serves, he did all three models over the years) for Stereophile. He felt the III was an improvement over the II for him.

PHC1 02-06-2021 02:23 PM

I owned both the Sophia 2 and 3 for a bit of time. Drove them both with various tube and solid state amps. I did not notice any significant difference in efficiency where one would clearly be an easier speaker to drive. They both were quite happy with either tubes or solid state at normal/responsible listening levels.


All times are GMT -4. The time now is 03:30 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.