Need suggestion on cooling system
 

I have this fully loaded rack that will be housing GS150 and Ref. 6 to replace the Mac system.

Would also be adding a phono amp.

Will have about 5 inches clearance on top of GS150 and Ref. 6.

Will run fans on GS at full speed. How ever the pre will need some cooling.

Any suggestions, photos, make of the system?

http://i970.photobucket.com/albums/a...1/P6260128.jpg

Any of your electronics have a USB power? If so, you could use a USB/Fan to circulate air through the rack, pushing or sucking out the hot air.

https://cdn.shopify.com/s/files/1/04...s-2_large.jpeg

Low power and low noise.

This looks good too

https://images-na.ssl-images-amazon....L._SL1000_.jpg

https://www.amazon.co.uk/AC-Infinity.../dp/B00QFWWZQO

I use two of these in my rack.They are very nice and perform well.Different level settings and or thermostat control. Pretty quiet even on the automatic setting.

Was hoping for a 19" frame about 2-3 inches wide. That way less obstruction.

Maybe this style.https://www.amazon.com/gp/aw/d/B01MRS2HE7?psc=1#

you need this!!!!

http://www.middleatlantic.com/produc...er-panels.aspx

:yes:

You have a v nice system. With a $70k investment, it is, imo, time for a quality audio rack designed for vibration control and enough clearance to let your equipment breath. Your gear will last longer and your music will sound better.

:yes::yes:

Put amp on amp stand between speakers. Get a more open audio rack and move to the side. Not only components run cooler, SQ will improve without rack in between speakers.