Incoming Power and General Info
1 Attachment(s)
Looking at tonight’s readings I have been hovering around 116 incoming volts. The PS 10 converts this to a Steady Eddie, 120V out.
I am very happy with what I am hearing and feeling, knowing there is a steady flow of power to my components. It has been raining hard here in the Northwest and I am wondering if losing voltage is a factor from this rain ☔️ as the incoming voltage usually hovers around 118V. 2fastdriving was experiencing much less then what I am seeing tonight on the P10 and I know he is very happy with his sound much more now after scoring his regenerator from Ivan. Not to open a can of worms but Nordost Tyr 2 feeds the power plant, and I will be going up to Odin 1 in about 2 weeks and curious what this will do to the incoming power. Can anyone argue with facts that there is not a benefit of these components, in a polite manner of course, I have kids [emoji4]. https://www.audioaficionado.org/atta...4&d=1511325958 Attachment 52724 |
1 Attachment(s)
Attachment 52732
Follow up, day 2 - no rain, partial clouds, it’s 68 degrees in Seattle - odd Today the P10 shows almost a match between incoming and outgoing voltage, yesterdays results, lower then today are in the previous post. Does the rain change incoming power from the grid to your home and why does it matter if your running proper gear that addresses voltage within the home running your system? Open for comment, Happy Thanksgiving All! |
Ed in my area we have voltage fluctuations due to high winds. Never really noticed anything just due to rain, but I don’t have my P10 yet. When it arrives I will keep a closer eye on that kind of thing.
|
Quote:
|
Quote:
Best approach is a "home audition" to determine if power conditioning, filtering or regeneration will benefit your particular case. With a return policy in place that is. :yes: Many manufacturers are starting to embrace that type of an approach and I would consider that fair, logical and honest. |
Quote:
|
While my P10 certainly regulates the voltage swings - which are not as severe at my new home, it has not come without a cost.
Plugging my amp directly into my wall outlet has provided much better performance. I was told by my Ayre dealer that this would be the case. I didn't believe him. I do now. |
Quote:
I agree completely with you, any power conditioner/regenerator will help. They reduce EMI/RFI, they provide a steady current stream and just remove most if not all fo the electrical noise from the AC lines. Properly shielded power cords will help also, it's all about removing or lowering the noise floor to as low as possible. |
Quote:
So then do you still use the P10 |
I purchased a PS Audio DirectStream DAC just after it was released. At the time, I had it plugged into a Furman power conditioner. As soon as the Furman was replaced with a P10 Power Plant, I immediately noticed an improvement in the sound of the DAC.
|
All times are GMT -4. The time now is 05:09 PM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.