AudioAficionado.org

AudioAficionado.org (https://www.audioaficionado.org/index.php)
-   General Audio Discussion (https://www.audioaficionado.org/forumdisplay.php?f=54)
-   -   GigaFoil (https://www.audioaficionado.org/showthread.php?t=45823)

Cincy2 05-14-2019 03:28 PM

GigaFoil
 
Opinions?

https://www.djmelectronics.com/gigaf...et-filter.html

Thx
Cincy

Puma Cat 05-14-2019 03:42 PM

Quote:

Originally Posted by Cincy2 (Post 964837)

A number of folks here like it. Its supposed to work very well for stripping out EMI and RF noise from Ethernet runs.

crwilli 05-14-2019 05:11 PM

GigaFoil
 
I was able to test one in my system. I found it did work IF I used a high end cable as the last 0.5 meters to my SilenZio. Inserting it at the end of my 10 meter Belden Ethernet cable and then using a few random cables I had lying around did nothing. Whatever ‘goodness’ the GigAfoil V4 added was stripped away by the crappy cable. But when I used a $600 Revelation Audio cable (made in Palm Coast FL), there was a noticeable improvement in the sound.

I am a believer in the effect. There seem to be a few ways to reduce/eliminate EMI/RFI and this is a good one.

Other ways include using high switches or some other sort of wire to fiber to wire system such as what Stephan has done.

I am still considering what I am going to do but will do something.

SuperD 05-14-2019 05:32 PM

Quote:

Originally Posted by Cincy2 (Post 964837)

The pro usb may be a good solution for you assuming it sounds good, I haven't heard that module yet, otherwise the GigaFoil is money well spent. It allows you to keep Cat5/6 in wall and opt for a short run of your preferred ethernet cable from the gigafoil to your select ii. Ask Ken(alpinist), I believe he is using one with his select ii. The GigaFoil need a solid LPS(Keces P3, Uptone Ultracaps LPS 1.2) are what i'm using.

Dave

Robc33 05-14-2019 10:14 PM

I installed one with the upgraded Keces P3 power supply, with an AQ Diamond ethernet cable between it, and my Lumin S-1. There was a very noticeable difference. Well worth the money, in my system.

Masterlu 05-14-2019 11:13 PM

I plan on selling the Keces P3 power supply very soon.:ok:

Cincy2 05-15-2019 07:32 AM

Quote:

Originally Posted by Robc33 (Post 964897)
I installed one with the upgraded Keces P3 power supply, with an AQ Diamond ethernet cable between it, and my Lumin S-1. There was a very noticeable difference. Well worth the money, in my system.

I have an AQ Diamond now so this is exactly the configuration I have chosen.

Thanks to all.

Cincy

For The Love of Music 05-15-2019 09:50 AM

I have overhauled my whole Digital Front End to support streaming with amazing results.

The Gigafoil does work better with a LPS and Quality Ethernet cable and even better with added AC and DC cables and isolation to the LPS.

Robc33 05-15-2019 09:20 PM

Quote:

Originally Posted by Cincy2 (Post 964920)
I have an AQ Diamond now so this is exactly the configuration I have chosen.

Thanks to all.

Cincy

I am certain, that with your equipment, you will very clearly be able to hear the improvements. I added some AQ Storm series power cords, and the results are quite simply spooky! I don't know how to better describe it better than that, but I now am experiencing an emotional involvement that I had, until now, not achieved. I know better than to say that I"m "done", but, I'm very happy with my digital front end right now. Even my wife had to admit she could hear the difference!

robfine 05-16-2019 12:28 AM

“Sure Honey, I can hear a difference. Now, can you drive me to the mall?”


All times are GMT -4. The time now is 10:51 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.