Stillpoint Ultra 5s under MC2301s Install Question
1 Attachment(s)
Getting ready to attach my new Stillpoint Ultra 5’s to my Mcintosh MC2301. Unfortunately the Ultra 5’s have a larger diameter then the Ultra SS.
I need to remove the plastic pieces from my MC2301’s. Since I have never opened the bottom cover on the amp I am not sure what purpose they serve and if they can be removed safely. Photo taken my vintage tube. :) |
IF I remember correctly, you remove the bottom plate (easy), those white things will snap out by squeezing them.
|
White parts are use to bolt to the wood pallet.
|
Can you triangulate them inside the feet and not worry about the white clips? If not, quad them inside the feet.
FME, the best success is positioning the Stillpoints under power supplies, capacitors... |
Stillpoint Ultra 5s under MC2301s
Quote:
Thank You crwili. :D Removed the white clips by taking the bottom cover off the MC2301's. The clips were then removed by squeezing and pushing them from the cover . Ultra 5's installed without interference from the white clips, ultra SS's moved to other pieces of gear. |
Isn't there an adaptor that fits the existing footer holes?
|
Quote:
Glad I could help. I am curious about the impact of moving from Ultra SS to Ultra 5’s. |
Quote:
Yes, the Ultra 5’s are installed with the adaptors in the same location as the stock feet. Same location I had the Ultra SS’s. With the plastic clips removed, the Ultra 5’s were easily installed. |
Rob.......I have the Stillpoints Ultra SS footers installed on my pair of MC2301 amplifiers. Curious to read your impressions of any sonic differences with the new Ultra 5's installed on your amps.
|
Stillpoint Ultra 5s under MC2301s
Unfortunately I have made several changes over the last few weeks/months. Not sure if I will be able to give a Ultra SS to Ultra 5 sonic difference. Especially since my new speakers are still breaking in. Although I can say that my system is sounding cleaner/lower noise floor since adding the Ultra 5's under the amps. Also included in the upgrade was moving the Ultra SS's from the MC2301's to my DAC and tube pre amp. My entire 2 CH system is now on Stillpoints.
|
All times are GMT -4. The time now is 08:17 AM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.