AudioAficionado.org - Auditorium 23 SUT/EMT TSD15/Shindo

Page 2 of 7

Last »

Show 40 post(s) from this thread on one page

AudioAficionado.org (https://www.audioaficionado.org/index.php)

- Shindo Laboratory (https://www.audioaficionado.org/forumdisplay.php?f=112)

- - Auditorium 23 SUT/EMT TSD15/Shindo (https://www.audioaficionado.org/showthread.php?t=9736)

pitch perfect

09-01-2011 08:08 PM

Quote:

Originally Posted by PHC1 (Post 199372)

Very cool Barr! :thumbsup:

The TSD15 I am using is the "modern tonearm" version for lower mass tonearms but they are probably very close in sound none the less.

Yep, exact same cartridge (same specs and sound) but different mount -

Yours is the 1.2" 'nude' mount version, Barr's is the SME style bayonet mount.

-M

ps. Glad you are diggin' it, btw. :music:

pitch perfect

09-01-2011 08:10 PM

Quote:

Originally Posted by sibelius (Post 199589)

Proper SUT/Cartridge pairing is absolutely essential. I have had a chance to use 7 different SUT's (Cinnemag, Sowter, Lundahl, Hommage, Altec, Silk, Hashimoto) and preferred the Hashimoto with my Koetsu Onyx. The SUT in the Shindo preamps and the Hommage will work with a variety of cartridges but are clearly optimised for SPU type cartridges. Will have a Garrard 301 up shortly so am eager to hear how my new Ortofon SPU classic will sound tapped directly into the VR preamp.

Hey Scott,

Oh, getting an SPU? Most excellent.. time for the Hommage, my friend! :D (A better match than with the Koetstu, of course..)

:yes:
-M

baddog

09-05-2011 08:24 PM

Quote:

Originally Posted by omodo (Post 199417)

Very nice setup Barr, there was a similar plinth/table/arm combo on a'gon earlier this year but unfortunately I missed it by a few hours.. Is that also the Shindo platter/bearing/weight combo?

To all - yes I am very fortunate in terms of the build and setup of the turntable system, Matt did a wonderful job in this regard. And she is quite the looker.

And yes that is a Shindo platter, bearing and weight as well on the turntable. I have two EMT cartridges for it, one for mono and one for stereo.

Barr

restock

09-20-2011 08:17 PM

Who built the plinth for your Garrard 401?

Very nice and what I like most - very compact!

omodo

09-22-2011 09:11 PM

I believe it's a Lignolab plinth and matching bronze/copper armboard

Plinth for Garrards & Thorens TD 124 - LignoLab Audio Equipment

Masterlu

09-22-2011 11:10 PM

Quote:

Originally Posted by PHC1 (Post 199364)

Oops, I forgot that we now have a dedicated Shindo forum. :D Ivan, please move this thread. :thumbsup:

And, away we go... :thumbsup:

PHC1	09-22-2011 11:15 PM

Quote:

Originally Posted by Masterlu (Post 207897)

And, away we go... :thumbsup:

http://fotos.imagenesdeposito.com/im...cias-12390.gif

inmybackpages

01-03-2013 09:24 PM

I'm really digging the TSD 15 + Auditorium 23 combo too. I also upgraded from the 103R. The 103R is a fantastic cartridge- probably the best under 1K - but the TSD 15 seems to make the music feel more alive.

Sancho22

12-12-2014 03:23 PM

I am getting a bad hum with the A23 with several cartridges and preamps including the Aurieges. Where do you guys attach the ground from the TT?
any other look-outs/suggestions?
thanks!

Hues	12-12-2014 08:59 PM

Try different locations (and orientations) of the SUT...most are susceptible to being near other transformers. With a little patience (and luck) you'll find the sweet spot.

All times are GMT -4. The time now is 02:02 AM.

Page 2 of 7

Last »

Show 40 post(s) from this thread on one page