Originally Posted by Ruleof72 (Post 1015805)

Looks like the amp was shipped today. Should get it this week. The amp is coming with Genalex Gold Lion KT-88. I'd like to have an extra pair of KT-88's. Looking at some Apex matched JJ's Any other affordable suggestions?

The other choice I need to make is which preamp to get. My DAC and Phono pre output 2 volts. I have a Schiit Sys, will that work until I can get something else?

I'll report back once I get the amp. Looking forward to some sweet tube sound!:banana:

Originally Posted by GeAllan70 (Post 1015801)

Sexy!! :naughty:

https://img.usaudiomart.com/uploads/...o-45-globe.jpg

:smoking:

Originally Posted by FloridaBoy (Post 1015868)

Save your $$$ and get an Inspire preamp. Wait on another pair of KT88's until you can get a new or used Inspire preamp. Use the Shiit until then.
The input tube, 6SL7 or 6SN7, will make more of a difference than a different power tube. See first sentence and repeat.

You are getting a fine amp and, all kidding aside, it deserves an Inspire preamp. :thumbsup:

Try the 6SN7 & 6SL7 in the Shiit and report back. :yes:

Originally Posted by Comzee (Post 1009316)

I 100% agree. Although, when I first bought my original "Fire-Bottle KT88" I did try 807 tubes. They overheated the PSU transformer and blew the fuse.

I actually still own my 807 pair + adapters, I've just never tried them again after that happened.

The amp I pictured above is the custom "6V6-H" headamp I ordered from DH. I've never tried 807 with it, but I assume I'll get the same result of what happened to my FB-KT88.

With all that said, ya 807 was actually my favorite pentode I'd ever tried. I got a good 100hr-ish hours of play time on them before it blew the fuse. Had the sweetest treble and most airy presentation of any tube I had tried.

A few months back in this thread, Straitwire showed off a custom 807 that was built for a customer (not sure if they post on this thread tho). Something I'd be interested in. In fact I'd be really interested in an 807 parallel (quad set of 807).

I've been looking for a 16-24wpc tube amp for a long time now, to accommodate my eventual speaker upgrade. I'd previously posted about 845 amps, but they're so hard to find. They either have bad designs (Chinese stuff) or are $$$. Still jamming out with my original FB-KT88, for now.

Originally Posted by Ruleof72 (Post 1015901)

That's the plan for now, save my pennies and get an Inspire preamp. Dennis indicated he is coming out with a new "matching" preamp next month. Any idea what that might be and how many pennies I'll need to save?

Originally Posted by FloridaBoy (Post 1015313)

Which tubes are you using?

Originally Posted by Bombadil (Post 1015349)

Are you certain it is transformer hum and not a ground loop?

Originally Posted by Jprod (Post 1016193)

Gold lion kt88 , tung sol rectifier and and tung sol 6sl7 driver

Originally Posted by Ruleof72 (Post 1016162)

The amp arrived today. :banana: Now to get it up and running

One quick question. Dennis sent two rectifier tubes, a 5AR4 and a 5u4 along with two input tubes, a 6SL7 and 6SN7. Since I'll be using a passive pre for a while he thought the 6SL7 will give a bit more gain.

Which rectifier/input tube combo should I use?

I'm going to message him and see if he has the "tube rolling" reference sheet for this amp done so he can send me a copy.

Thanks for the help!