Preamp with 2 outputs
Hi
I'm currently using a Levinson 326S mated to a 532 amp pushing B&W 802D2. I have just acquired a new B&W sub which only accept mono/stereo line level input. I had a very high quality Y adaptor made to send the preout signal to the amp and sub and have been happy with the results. However, as is the bain of this hobby, I want to seek out a high quality preamp that offers 2 concurrent outputs. Any suggestions on whats available and what might match the amp? I'm opened to swapping out the levinson setup entirely. |
Quote:
|
Unfortunately, the 326 prioritises XLR out first and so they dont output together
|
XLR and RCA output -> PS Audio BHK Signature PreAmp
2 x XLR (or RCA) output -> Audio Research Reference (I have the 5SE but I suspect the 6 should do as well) |
I'm no expert here, but couldn't you use the "record" rca outputs?
|
Oops. Never mind, they are fixed volume outputs.
|
1 Attachment(s)
The McIntosh C2300 preamp has three outputs; Main, 1, and 2 (each output allows both XLR and RCA connections).
I concurrently use the Main XLR output for my power amps and Output 1 with RCAs to my subwoofer. What's really nice is, from the front panel, you can enable/disable Outputs 1 & 2 independently of the Main output. Looking at the connections of the newer C2500 and C2600 preamps, they also offer this functionality. Attachment 47468 |
Quote:
|
I've tried this but no signal was going to the sub. I need to retry this.
|
well i'll be damned, i changed the input sensitivity of the sub and wow. Now to re divert the attention to another amp. Thanks for the response tdelahnaty!
|
All times are GMT -4. The time now is 05:08 PM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.