Visit to Stereodisk
1 Attachment(s)
I was fortunate to attend an event Sunday at Stereodisk, a small but growing record pressing plant in NJ. Founder Leandro Gonzalez is very knowledgeable and shared a lot of information about the process - from restoring old machines to shipping the finished product - and everything in between. Along the way, he shattered a few audiophile myths. This is a schematic of one of the machines he rebuilt.
|
3 Attachment(s)
Stereodisk cuts its own masters from digital or tape.
|
8 Attachment(s)
Of course, he has some signal processing equipment.
|
4 Attachment(s)
Yes, he has his own lathe.
|
1 Attachment(s)
I'm always careful not to touch other people's equipment without permission, even if there are no warning labels.
|
1 Attachment(s)
Obviously, he buys blank lacquers by the box.
|
2 Attachment(s)
Leandro currently has two presses in operation. His 12-inch press in manually operated.
|
4 Attachment(s)
The 7-inch press is automated.
|
2 Attachment(s)
Here's some raw material.
|
1 Attachment(s)
Some of the wiring may not fully comply with Ivan's Audio Cabling Specification Standard.
|
All times are GMT -4. The time now is 04:41 AM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.