Magnaspot - installers dream
 

Today, I used my Magnaspot XR1000-K2 for the first time. I had to locate where to drill a hole for my new outdoor antenna cable.

This was actually a true test of the tools capability, as the thickness between my outside and inside wall is a bit over 3’

This is due to the A frame roof over this room, and the 3’ dead space is to minimize the slope of the interior walls.

The tool worked with pinpoint accuracy, and enabled me to drill, and locate my snake on the inside within 2 minutes flat.

I will post some photos later under my Accuphase T-1200 thread.

https://www.techtoolsupply.com/v/vsp...S-XR1000-5.jpg

https://www.techtoolsupply.com/v/vsp...S-XR1000-2.jpg

https://www.parts-express.com/Data/D...-635_ALT_9.jpg

https://www.amazon.com/Magnespot-XR1...ords=magnaspot

PS: Hilti makes a nearly identical model for $600 :whistle:

Also, the same company makes the Magnapull XP-1000

I have been using this for years, simply amazing! I use it mostly for pulling flat Ethernet under previously installed carpet; my last job was 55’ under carpet. It worked like a champ; just read the reviews, they are true.

Just buy it, and thank me later. ;)

https://www.amazon.com/Magnepull-XP1...ARD8Z99246XAFC

Great stocking stuffer to receive from the kids at Christmas [emoji319]

Wow, where has the Magnapull been all my life! I guess I've been out of the install business WAY too long.

And the Oscillating Gang Box Saw, really?

https://www.amazon.com/Qbit-SQ1000-S.../dp/B01GKKE2W0

The electrician who did the 20 amp runs for the audio room used a magna pull. Super cool!