C2300 Remote accessing MDA1000?
Hmmmmm... Well reading the instruction manual didn't offer any insight. :sigh:
What I'm trying to do is access the MDA input selector via C2300 remote. I first thought maybe I had the data port connected wrong! Well... I did!! Fixed it!! Now the MDA flashes "BYPASS ON" is the only result I see. I just assumed that one would access that unit data port function on the C2300 remote. Then select appropriate corresponding button, for the desired results? It's gotta be that easy!? Signed, Clueless Ken |
Ken......On my C1000 remote the button labeled AM (output 1 in blue above the button) cycles my MCD500 inputs form CD to Coax to Optical, and back to CD. I don't have to press the blue button first, just press the AM button. Give it a try.
|
Quote:
|
Ken.......Just to be certain, you are using a stereo mini plug for the data cable, correct?
Try this with the C2300 remote. Press the AM button followed by pressing one of the Numbered Push-Buttons to select the desired Digital Input of the MDA1000. |
Quote:
Thank you |
Ken.......I must be missing something here. When I look at the MDA/MCD1000 owner's manual I don't see any din plug on the rear of the MDA1000 Converter. On the rear apron I see the balanced and unballanced jacks for left and right audio outputs, the seven various digital inputs, the seven switched data ports (mini stereo plugs), the power control in and out (mini stereo plugs), the data in (mini stereo plug), the IR input (mini stereo plug), and the power cord connector. I am drawing a total blank about any din plug.
As I understand the data cable wiring scheme, you run a single data cable (mini stereo plug) from the Data In port on the MDA1000 Converter to the CD Data port on the C2300. Is this how it is connected? Stereo Mini Plug http://www.cablesys.com/Upload/Produ...5851006_lg.jpg |
5 Attachment(s)
Quote:
Ken |
Ken.......Does the MDA1000 switch inputs using its own remote without a problem?
|
Quote:
Ken |
Ken.......McIntosh remote controls have always been a hodge-podge of functionality between the different model remotes. It is a shame.
|
All times are GMT -4. The time now is 08:43 AM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.