Our "Go Big or Go Home Theater"
 

Here are a few pics of our HT which is 90% completed (after the list of components, and modifications).

This what we have done to the room...
First reflection panels:

1. (3) 2'x4' panels on the left and right walls made of 2 layers of Roxul R80 2" thick sheets (6 in total).
2. (6) 2'x4' panels on the ceiling made the same as the side wall panels.
3. Front wall behind screen is covered with 3" of Roxul R60 wall to wall, and 4' high (from the ceiling to 4' down).
4. Rear wall has 9" of Roxul R60 wall to wall EXCEPT for the corners which should be done this week (the corner traps will be of R80).
5. Front stage is stuffed with R19 Pink Fluffy, and topped with OSB.
6. Rear seating stage is stuffed with Pink Fluffy, and topped with OSB.


Room Construction:

1. Room within a room construction with R19 insulation (inner, and outer walls).
2. Complete sub floor is stuffed with R19 topped with OSB.
3; One layer of OSB covers the wall with a 2nd layer of drywall separated by Green Glue on all four walls.
4. Hat channels on the ceiling with 2 layers of drywall separated by Green Glue.
5. 2 solid core wood doors with 2 layers of 3/4 MDF added.
6. Fire clay used for all outlets, and switches to seal the hole.
7. Automatic door closers on both entry doors.
8. Automatic door seals on both entry doors.
9. Door seals for the area around the doors.
10. 1950 Art Deco glass door handles (inside HT one is modified with Blue LEDs, and frosted finish).


Room Finish:

1. All of the walls will have Blue or Black GOM covered panels (as will the ceiling), but only the ones listed will have any acoustic materials added to them.
2. The stage is covered with Home Depot black carpet, and the soffits are covered with JoAnnes Black Triple Velvet (after the complete room was painted flat black).
3. Floor has Lowes Plum colored Carpet with premium pad.


Equipment:

Front stage...
1. JBL 2360A horns with EV DH1a drivers for the front 3 channels.
2. DIY 1/4 Pie Bass Bins.
3. Danley DTS-10 subs (one under the front stage, and the other under the rear seating area).
4. MiniDSPs 2x4s for crossover for the front 3 channels.
5. Topping T chip amps for the front 3 channels (powering the Horns).
6. (2) Yamaha P2500s amps for the bass bins.
7. (1) Yamaha P7000s amp for the subs.
8. Denon 4520 for processing and surround amplification.

Surround...
1. Surround, and rear surround speakers are Klipsch HIP powered by the Denon 4520

Media...
1. DIY Unraid NAS
2. i3NUC for HA PC
3. i3 NUC for Media Server.
4. PS3 for gaming
5. XBox 360 for gaming.

Video...
1. Panasonic AE8000 projector.
2. SeymourAV 195" diagonal scope AT screen.
3. Darbee Darbet Processor.
4. Monoprice Redmere cables.

Miscellaneous...
1. APC UPS for Computers.
2. APC UPS for Projector.
3. Monster 7000 for power conditioning.
4. Samsung Galaxy Note for control via CQC HA Software.
5. Monoprice speaker wire.

Lighting...
1. Blue LED rope lighting for the soffits, stairs, and entry hallway.
2. LED spot lights in soffits for entey and exit lighting.

I think that pretty much covers it. Hope you like the pics... We enjoy watching movies daily in our HT.

http://i1065.photobucket.com/albums/...ps52a85ff9.jpg

http://i1065.photobucket.com/albums/...ps213870c1.jpg

http://i1065.photobucket.com/albums/...ps0ae7213b.jpg

http://i1065.photobucket.com/albums/...ps076c5fa6.jpg

http://i1065.photobucket.com/albums/...psf4f206dc.jpg

Wowza!

Big is right!
Regards,
Jim

Totally epic!! Congrats! :tiphat:

Thanks for the comments. We truly appreciate having a dedicated Home Theater. I use it most of the day for watching movies, browsing the Internet, and watching DVR TV Shows.

NICE! Great job!

Huge project and very nice results! Congratulations!

Excellent work... congrats!

Very nice. I like the blue lighting detail. Can I come over?

Thanks for the comments. I am so glad we did what we did to the room as now i listen to more music like i used to.