AudioAficionado.org

AudioAficionado.org (https://www.audioaficionado.org/index.php)
-   Krell (https://www.audioaficionado.org/forumdisplay.php?f=47)
-   -   Considering Krell KRC-3 or KRC-HR Preamp (https://www.audioaficionado.org/showthread.php?t=44346)

naturephoto1 11-14-2018 08:48 PM

Considering Krell KRC-3 or KRC-HR Preamp
 
I would very much appreciate some input in possibly purchasing once one becomes available Krell KRC-3 or KRC-HR preamp. I have some exceedingly efficient horn speakers, the Oswalds Mills Audio (OMA) New Yorker Prototype speakers that I purchased some years ago (you can see some photos below). These speakers have an efficiency of 104 or 104.5dB which has been a mixed blessing. I really like these speakers and have no intention of replacing them. I have gone through several amps over time due to the fact that I have been hearing hum through the speakers at my listening seating 10 feet away. I had purchased a First Watt M2 (25 watts Class A at 8 ohm) which is the noisiest of the First Watt amps with a noise of 500uV and still heard hum coming through the speakers at my seating now for the last 8 years. I have been using the amp with a highly modded Audio Research LS10 preamp. I just purchased a much quieter First Watt amp, the F7 (20 watts Class A at 8 ohms) which only has a noise of 100uV. When I plugged in the amp there was silence coming through the speakers which was an excellent sign. Unfortunately, when I then connected the modded ARC LS10 preamp I was again getting hum through the speakers at the listening seating. It has been suggest that the LS10 is a high gain preamp and is having a mismatch with the First Watt F7 amp.

I am trying to avoid a passive preamp and it has also been suggested that I may wish to replace the ARC LS10 with a Krell KRC-3 or KRC-HR Preamp that will have lower gain output and will be quieter. Hopefully one of these preamps will mate well with the First Watt F7 amp and will at least be quieter so that I no longer hear the hum at my seating location.

I wish to use the preamp both for my 2 channel listening (both analog including vinyl and digital) and also would need to have the Pass Through for a processor capabilities to use with my Home Theater. I know know that these are old preamps but am considering them as they have a fine reputation for their performance, are known to be quiet, and they offer the capabilities of using one their inputs for a processer. I am interested in the best sound though. The Pre Pro processor to be used with the Preamp is the Marantz av8802A.

Thanks very much for your consideration and your observations and suggestions.

Rich


https://images2.static-bluray.com/ht...62718_full.jpg

https://images.static-bluray.com/htg...62719_full.jpg


All times are GMT -4. The time now is 06:10 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.