AudioAficionado.org

AudioAficionado.org (https://www.audioaficionado.org/index.php)
-   B&W Speakers (https://www.audioaficionado.org/forumdisplay.php?f=26)
-   -   Any experience with the new Bryston cubed 14B3 with 802D3? (https://www.audioaficionado.org/showthread.php?t=41151)

GregGale 11-12-2017 02:52 PM

Any experience with the new Bryston cubed 14B3 with 802D3?
 
I have been contemplating upgrading my amplifier which is a Classe Delta CA2300 rated at 300 watts per channel and was looking at the new Bryston 14B3 which is rated at 600 into 8 ohms.

I have had the previous version 4BSST in my system and did not feel it sounded as smooth as my Classe.

I have read many positive reviews on the new cubed series however I am very hesitant just purchasing as the dealer does not have one for audition at home.

I have also been looking at the McIntosh MC452.

It is not that I am unhappy with my Classe but have quite a large room and at times I really like to crank up the system and feel more power might benefit me and I am sure the 802D3's could handle the power.

joey_v 11-12-2017 03:46 PM

Why not just the 601?

GregGale 11-12-2017 09:35 PM

I am looking only for a unit in one chassis that fits in my current audio set up. So for me it must be a two channel set up.

That is why I referenced the MC452, however the Bryston 14B3 will generate substantially more power than the MC452 and based on the specs should be quieter as well.

Bwguy 11-15-2017 10:52 PM

I am also considering both amps so curious if anyone responds. Currently using a Classé 2300 with 893d3’s.

Bwguy 11-16-2017 07:56 PM

Sorry... meant 803D3’s

GregGale 11-16-2017 08:17 PM

Quote:

Originally Posted by Bwguy (Post 879929)
I am also considering both amps so curious if anyone responds. Currently using a Classé 2300 with 893d3’s.

That is what I am using with my 802D3 and it sounds great but I have a large room and really like to push it. I am just wondering on what doubling up on the power will do but know the speakers were voiced using Classe and I have been a bit reluctant to go with Bryston since I tried out the previous generation and did not feel it was as smooth as the CA2300 but the cubed version I heard is substantially better in this area.

Who makes 893D3's? That is not a B&W speaker that I am aware of.

Masterlu 11-16-2017 08:19 PM

Bwguy... Welcome to AA! :wave:

Bwguy 11-16-2017 08:26 PM

I have the 803D3’s.
I too am a little reluctant to go with Bryston as I have always heard they were a little bright. However, everything I read about the new series say the brightness is gone and sound smooth and natural. I was really considering the Macintosh 601’s but now not sure which way to go. I have no way to A/B them as they are sold by different dealers.

krustycat 11-16-2017 08:50 PM

601's sound very nice.

trponhunter 11-17-2017 11:58 AM

I would imagine there are better things to do to upgrade and spend this amount of money other than replacing one excellent amplifier for another excellent amplifier


All times are GMT -4. The time now is 08:16 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.