AudioAficionado.org

AudioAficionado.org (https://www.audioaficionado.org/index.php)
-   PMC Speakers (https://www.audioaficionado.org/forumdisplay.php?f=25)
-   -   PMC EB1i impedance curve (https://www.audioaficionado.org/showthread.php?t=9534)

Jerome W 08-18-2011 10:54 AM

PMC EB1i impedance curve
 
Hello folks, and Ian especially,

Can we get a table of the impedance curve / frequency of the EB1i somewhere ?
If not, do you the minimal impedance of it ? for which frequency ?
Thanks a lot !

jdandy 08-18-2011 11:40 AM

Jérôme.......I hope you have better luck that I did with this request. I asked PMC in Great Britain for the EB1i's impedance/phase curve chart, and never got a response. I emailed them several times, but no information was ever sent to me. I asked Ian on this forum, and he saud he would find the information, but it never came.

Jerome W 08-18-2011 11:55 AM

Quote:

Originally Posted by jdandy (Post 194150)
Jérôme.......I hope you have better luck that I did with this request. I asked PMC in Great Britain for the EB1i's impedance/phase curve chart, and never got a response. I emailed them several times, but no information was ever sent to me. I asked Ian on this forum, and he saud he would find the information, but it never came.

Thanks Dan !

And you don't have the instruments to take the measures by yourself I guess...
too bad when one thinks about all the gear you have in the studio :D !

jdandy 08-18-2011 12:39 PM

Jérôme.......Those test instruments are sophisticated and very expensive to own for occasional use. I had hoped to see Stereophile put the PMC EB1i through a full review. They would have done those tests and published them.

Jerome W 08-18-2011 12:45 PM

Quote:

Originally Posted by jdandy
Jérôme.......Those test instruments are sophisticated and very expensive to own for occasional use. I had hoped to see Stereophile put the PMC EB1i through a full review. They would have done those tests and published them.

Yes Dan, I can imagine.
I suppose that if PMC does not communicate on that, it could be because of a very tortured curve !

Face 08-18-2011 01:00 PM

This is pretty accurate.

Dayton Audio WT3 Woofer Tester

ian@pmc 08-18-2011 01:03 PM

I tried getting to Stereophile for review the EB1i. They instead chose the DB1i.:icon_thumbsdown:

I wouldn't hold your breath for an impedance curve.

ian@pmc 08-18-2011 01:20 PM

Are you guys running into problems with powering your EB's?

jdandy 08-18-2011 01:21 PM

Ian.......If memory serves me right, somewhere I saw an impedance and phase curve chart on the EB1i, but failed to bookmark it, and have not been able to locate it again. It would seem to me that this data would be readily available from the factory. Surely, Peter Thomas has made these tests on all of his designs. Why is it so difficult to get this information?

This is the post where I inquired about the EB1i impedance and phase data over two years ago. http://audioaficionado.org/19302-post1.html

jdandy 08-18-2011 01:29 PM

Here is an impedance and phase curve chart that was publish in HiFi Crtitic for the IB2i. Sorry, but it wasn't any clearer in the web page.

http://www.hificritic.com/downloads/...IC_PMCIB2i.pdf


http://i453.photobucket.com/albums/q...phasechart.jpg


All times are GMT -4. The time now is 01:47 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.